EGT yes or no..?
#3
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
Jason I can only comment on my own experiance,I decatted my 02 and had a egt sensor fail it snapped off and was lying in the bottom of my uppipe I replaced it with a new one this failed as well, I ended up putting a bung in the egt sensor hole and put a 2.2 resistor between the wires 10,000 miles later still haven't had any problems
#4
Scooby Regular
iTrader: (5)
Join Date: Feb 2003
Location: Worcester
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gussy
Jason I can only comment on my own experiance,I decatted my 02 and had a egt sensor fail it snapped off and was lying in the bottom of my uppipe I replaced it with a new one this failed as well, I ended up putting a bung in the egt sensor hole and put a 2.2 resistor between the wires 10,000 miles later still haven't had any problems
simular story here
o2 wrx
#6
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Half way up
Posts: 4,791
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by austen_wrx
That bolt and resistor i gave you should come in handy then Jas!!
I had been told by some so called 'expert' that I'd be in the mire if I bypass EGT...! As always it is obviously complete bollocks..!
Thanks Austen.
BTW nearly got my flaps fitted..!
Jason
Thread
Thread Starter
Forum
Replies
Last Post
john banks
Drivetrain
3
28 April 2002 11:21 PM