EGT yes or no..?
When decatting up & down pipe should the EGT sensor be fitted or not (ie resistor fix and egt bung)..?
Jason;) 05 wrx |
bttt
|
Jason I can only comment on my own experiance,I decatted my 02 and had a egt sensor fail it snapped off and was lying in the bottom of my uppipe I replaced it with a new one this failed as well, I ended up putting a bung in the egt sensor hole and put a 2.2 resistor between the wires 10,000 miles later still haven't had any problems
|
Originally Posted by gussy
Jason I can only comment on my own experiance,I decatted my 02 and had a egt sensor fail it snapped off and was lying in the bottom of my uppipe I replaced it with a new one this failed as well, I ended up putting a bung in the egt sensor hole and put a 2.2 resistor between the wires 10,000 miles later still haven't had any problems
simular story here o2 wrx |
That bolt and resistor i gave you should come in handy then Jas!! ;)
|
Originally Posted by austen_wrx
That bolt and resistor i gave you should come in handy then Jas!! ;)
I had been told by some so called 'expert' that I'd be in the mire if I bypass EGT...! As always it is obviously complete bollocks..! Thanks Austen. BTW nearly got my flaps fitted..! Jason;) |
:cool:
|
All times are GMT +1. The time now is 09:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands