Rear Lights....Elp......
13 March 2005, 10:22 PM
#1
Rear Lights....Elp......
Okay...sould taking out a rear light be as simple as it looks??
You undo all the 8mm bolts from within the boot that hold on the light, and pop it out?
When looking at the rear of the light from outside the car, there is a little trim that goes just under the light...does this also need to come off for the light come out?
I have undone the bolts, however the light is not budging...
seems there is black silicone holding this in..could this be the case...
--Sam
You undo all the 8mm bolts from within the boot that hold on the light, and pop it out?
When looking at the rear of the light from outside the car, there is a little trim that goes just under the light...does this also need to come off for the light come out?
I have undone the bolts, however the light is not budging...
seems there is black silicone holding this in..could this be the case...--Sam
13 March 2005, 10:39 PM
#2
Scooby Regular
Join Date: Sep 2000
Location: Deepest Darkest Dorset!!
Posts: 10,011
Likes: 0
Received 1 Like
on
1 Post
the sealer's a nightmare with these lights, you could 'try' warming it with a hair dryer, that might soften it a bit, but they're normally very wel stuck, the small bit of painted trim comes off with the light!!
14 March 2005, 05:20 PM
#6
Scooby Regular
Join Date: Dec 2002
Location: devon
Posts: 2,944
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tone Loc
This sealer was put on by Subaru to try and stop the wave of poeple fitting 'chav' lights to the car.... don't fight it. Leave the lights as they are and bin the cheap **** ****e you've just bought 
Tony.
Tony.
rofpmfsl
piccy time tone ? ;-)
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM