Help - EGT Sensor on an 03 WRX
09 March 2005, 07:40 AM
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jul 2002
Location: just to your right
Posts: 1,859
Likes: 0
Received 0 Likes
on
0 Posts
Help - EGT Sensor on an 03 WRX
I recently modded my other half's WRX and stuck on my 03 STi Turbo and Up-Pipe. As the STi has no EGT Sensor there is no hole in the up-pipe so the egt sensor was removed. The car was remapped (EcuTek) and ran fine for a couple of weeks. But then the CEL light came on, when we checked the fault code it was form the egt but as there is no egt sensor in, so surely there is a way of stopping this using the EcuTek Software?
Marc
Marc
09 March 2005, 08:52 AM
#2
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
Marc,
were the egt plugs into the wiring loom bridge the connector pins with a 2.2 ohm resistor after about 1min of running the car your cel light will go out you can get the resistors from maplins I did this to my 02 bugeye and have had no probs.
were the egt plugs into the wiring loom bridge the connector pins with a 2.2 ohm resistor after about 1min of running the car your cel light will go out you can get the resistors from maplins I did this to my 02 bugeye and have had no probs.
09 March 2005, 09:02 AM
#3
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jul 2002
Location: just to your right
Posts: 1,859
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gussy
Marc,
were the egt plugs into the wiring loom bridge the connector pins with a 2.2 ohm resistor after about 1min of running the car your cel light will go out you can get the resistors from maplins I did this to my 02 bugeye and have had no probs.
were the egt plugs into the wiring loom bridge the connector pins with a 2.2 ohm resistor after about 1min of running the car your cel light will go out you can get the resistors from maplins I did this to my 02 bugeye and have had no probs.
Trending Topics
along with modified knocklink and and oil temp sender 
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
