Intermittent Vibration
#1
Intermittent Vibration
As above I think its from the front. Comes and goes, particularily apparent when cold or on uneven surface. It feels very like out of balance wheel except for the fact I have had all four wheels checked and the fact it is intermittent (sp?). Think it might possibly be a wheel bearing but doesn't have the usual whine I've had with previous cars. MY99 UK Turbo.
Any ideas
Thanks Pat
Any ideas
Thanks Pat
#3
Originally Posted by 69WRX
I had the same problem the other week.
Then the crankshaft pulley fell off !
Worth a check to see if bolt is tight.
Then the crankshaft pulley fell off !
Worth a check to see if bolt is tight.
Thanks mate I'll just go out and see, don't fancy that going!
Pat
#6
Scooby Regular
Join Date: Dec 2004
Location: N Yorks
Posts: 663
Likes: 0
Received 0 Likes
on
0 Posts
Had the same thing with a set of almost new tyres.
Replaced just about everything including a set of AP discs as I thought it couldn't be the tyres as they were new. Swapped them f to r, side to side, no joy. Had them balanced about 6 times still the same.
Turns out that they were out of round. You can balance them perfect on the machine, but you still get the vibration as your driving on an egg shape tyre. (Most noticeable at 50mph+)
New tyres (different make) no vibration. Ahhh... Daz
Replaced just about everything including a set of AP discs as I thought it couldn't be the tyres as they were new. Swapped them f to r, side to side, no joy. Had them balanced about 6 times still the same.
Turns out that they were out of round. You can balance them perfect on the machine, but you still get the vibration as your driving on an egg shape tyre. (Most noticeable at 50mph+)
New tyres (different make) no vibration. Ahhh... Daz
#7
Thanks for all the replies lads. Checked the pulley no joy there. Going down to the tyre fitters tomorrow to see if I have a damaged wheel. This thing is really starting to bug me. I have a notion that it is a wheel but just wanted to see if anybody had a similar occurance before I fork out for a new set of rims.
Thanks Pat
Thanks Pat
Thread
Thread Starter
Forum
Replies
Last Post
Bazil_SW
Engine Management and ECU Remapping
24
21 September 2015 11:55 PM