cel fix Help.
18 January 2005, 09:28 PM
#1
Scooby Regular
Thread Starter
Join Date: Apr 2002
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
cel fix Help.
Does anybody know the wiring sequance for using a cel fix on a my02 car.I have a friend who recently purchased a Scoobysport exhaust via e-bay.Included was the cel fix but no wiring diagram.We have had a local garage e-mail Scoobysport but have recieved no reply.The unit we have has 4 wires,orange,blue,black and yellow.
Thanx.
Thanx.
19 January 2005, 01:19 PM
#2
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
Si,
Cut the blue/silver wire to block135,pin 17.connect the orange wire to the ecu side and the blue wire to the side that goes to your 02 sensor,solder all the connections and insulate them.Carefully remove some of the insulation from the yellow/blue wire to block137,pin 3.solder the yellow wire onto the yellow/blue wire insulate the joint.earth the black wire to the chassis using the ecu locating stud and nut.
Looking at the ecu block 137 is at the top.
block 135 is second from the bottom.
sorted.
Cut the blue/silver wire to block135,pin 17.connect the orange wire to the ecu side and the blue wire to the side that goes to your 02 sensor,solder all the connections and insulate them.Carefully remove some of the insulation from the yellow/blue wire to block137,pin 3.solder the yellow wire onto the yellow/blue wire insulate the joint.earth the black wire to the chassis using the ecu locating stud and nut.
Looking at the ecu block 137 is at the top.
block 135 is second from the bottom.
sorted.
Thread
Thread Starter
Forum
Replies
Last Post