squeak000

My car is showing fault code 33 and is running in 'limp home mode' with a rev limit of about 4000. The fault code is 'wonky speed sensor' but my speedo reads fine! I havn't fitted the UK speedo convertor yet as I want to make sure it all works first.

Anyone got any ideas?

billy scoob eck

33 Vehicle Speed Sensor.

pabs

Hi mate,
How did you get the code from the car, as I am sure my 95 RA has a fault. Thanks for your help mate...

By the way, I think the speed sensor refers to the engine speed sensor, which is located in the passenger side of the engine poking in through the cam cover at the top.

Cheers

squeak000

Pabs

Check this link:
http://www.saxonfields.freeserve.co.uk/Scooby%20Page/ECU%20Diag%20Page.htm

The black connectors are below the steering wheel.

I'll have a look for this engine speed sensor.

Cheers

Steve

pabs

Hi mate,
I have tried looking for these wires before and never found them...are they behind and plastic trim? DO I have to remove any parts to get to them?
Cheers

pabs

Mine is an '95 sti ra, can anyone confirm that my car should have these wires??

Any help is very appreciated!

jonny gav

iTrader: (1)

yes it will have them but they will be tied up under the dash somewhere if they have never been used before.

pabs

Time for me to get looking then...
thanks a lot jonny gav!!