Lower ball joint advice
#1
Lower ball joint advice
I've just taken my front lower hub ball joint out of my 94 import wrx.
This one I've taken out has a cone shaped shim. The new one hasn't.
Does this cone come off and go on the new one? Or is it a case of I've got the wrong ball joint?
This one I've taken out has a cone shaped shim. The new one hasn't.
Does this cone come off and go on the new one? Or is it a case of I've got the wrong ball joint?
#2
LOL, I posted the exact same thing a few days ago. You need to get the cone off the old one and onto the new one. It will come - I stuck mine in a vice and whacked it off with a chisel after heating with a blow torch
#4
Scooby Regular
Join Date: Mar 2002
Location: Fcon Power Writer
Posts: 4,338
Likes: 0
Received 0 Likes
on
0 Posts
Do you have a ball joint splitter? If so pop the BJ back into the hub and thread the nut on a couple of turns to stop it moving
Fit the splitter and cone should pop off...
Rob
Fit the splitter and cone should pop off...
Rob
#5
Originally Posted by tweenierob
Do you have a ball joint splitter? If so pop the BJ back into the hub and thread the nut on a couple of turns to stop it moving
Fit the splitter and cone should pop off...
Rob
Fit the splitter and cone should pop off...
Rob
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM