Neilo

Hi all,

I have just recieved my samco hoses so need to remove the intercooler to fit the ones around the turbo etc. What is the best way of removing it (in stages) almost a step by step process would be useful.

Also, any ideas on how best to fit the radiator ones??

Cheers!
Neil.

P.S. its a 2003 car

RB5_245

remove the bolts at the sides of the cooler, then all the jubilee clips on the throttle body and compressor outlet. stand on the passenger side and move the thing about until the throttle body hose comes off, then pull the whole thing from the turbo.

It takes a bit of effort, but is easy really.

Dave

Neilo

thanks mate, any ideas on the radiator?? should i just pull it off and drain it in to a container then pour it back in??

RB5_245

Radiator is not so simple, but if you're taking it off, at least put new coolant into it!

Dave.

Neilo

good thinking that man

RB5_245

Dave

Neilo

hehe, ive heeded your advice, and havent done the radiator ones yet. But here is how i got on with the others....curiously i have two left...which i cant figure out where they go!!!



Cheers,
Neil.

RB5_245

Nice.