Blitz dual turbo timer wiring HELP!
30 July 2004, 03:29 PM
#1
Scooby Regular
Thread Starter
Join Date: Jan 2003
Location: Isle of Skye
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Blitz dual turbo timer wiring HELP!
Hi folks, installing a blitz dual turbo timer with out a harness, (hard wiring) and I have located the ignition switch block, Can any one tell me where to splice the RED constant 12 v, GREEN IG and BLUE ACC wires from the blitz connector into the switch block?
There is 4 wires which come out of the ignition switch and go into a block connector,and then the colours change after the block connector,as follows
black + white ----------------/-------------black + yellow
black + blue -------------block-----------red + yellow
black + yellow --------connector-------blue + red
black ----------------------/--------------------red
Car is a 95 sti ra
CHEERS.
There is 4 wires which come out of the ignition switch and go into a block connector,and then the colours change after the block connector,as follows
black + white ----------------/-------------black + yellow
black + blue -------------block-----------red + yellow
black + yellow --------connector-------blue + red
black ----------------------/--------------------red
Car is a 95 sti ra
CHEERS.
Last edited by Nick_o_Teen; 30 July 2004 at 09:35 PM.
Thread
Thread Starter
Forum
Replies
Last Post