Notices
General Technical
Sponsored by:
Sponsored by: CARiD

idle problems in my99 uk turbo

Old Jun 22, 2004 | 04:56 PM
  #1  
teajunkie's Avatar
teajunkie
Thread Starter
Scooby Regular
 
Joined: May 2004
Posts: 185
Likes: 0
From: devon
Unhappy idle problems in my99 uk turbo

hi all i have a my 99 uk turbo and after purchase i found that the engine idles @ around 1'000,(normal i think)
But pull up at lights or roundabout 10 yrds later and oh dear revs drop engine almost stalls.

this is an intermittent problem but the local dealer cant find anything wrong????

any ideas anyone????

it might help to say i am not mechanicly minded though i am fully qualified auto electrician.

thanks people.
Reply
Old Jun 22, 2004 | 05:03 PM
  #2  
stevem2k's Avatar
stevem2k
Scooby Regular
 
Joined: Sep 2001
Posts: 4,670
Likes: 0
From: Kingston ( Surrey, not Jamaica )
Default

sticky Idle Speed Control Valve ( can be cleaned out ) is guess #1

MAF is possible (especially on a 99 ) but you would likely see a yo-yo idle .

Steve
Reply
Old Jun 22, 2004 | 05:54 PM
  #3  
teajunkie's Avatar
teajunkie
Thread Starter
Scooby Regular
 
Joined: May 2004
Posts: 185
Likes: 0
From: devon
Default

thanks the revs do drop and raise irratically when at idle.

so how much if a new MAF? and where can i find idle controll valve?

sounds stupid but it's my first scooby.

thanks
Reply
Old Jun 22, 2004 | 10:02 PM
  #4  
stevem2k's Avatar
stevem2k
Scooby Regular
 
Joined: Sep 2001
Posts: 4,670
Likes: 0
From: Kingston ( Surrey, not Jamaica )
Default

Ah , there you go , yoyo idle . Your MAF is likely to be shagged .

New maf is £70 from your local dealer.

ask for a "22794AA010 Meter CP-air flow"

You'll need a security torx bit to get the old one out. ( it's located in the tube between the air box and the engine ). 5 minute job (really)

Drive it like an old lady until you swap it.


Steve

Last edited by stevem2k; Jun 22, 2004 at 10:13 PM. Reason: it's a torx bit, not hex you dumbass ..lol
Reply
Old Jun 22, 2004 | 10:04 PM
  #5  
Scott.T's Avatar
Scott.T
Scooby Regular
iTrader: (2)
 
Joined: Feb 2000
Posts: 6,181
Likes: 1
From: East Sussex
Default

You can ping off the security tab on the Star/Torx hex bolt with a small screwdriver, then use a normal Star/Torx tool
Reply
Old Jun 23, 2004 | 08:34 AM
  #6  
FishDog's Avatar
FishDog
Scooby Newbie
 
Joined: Sep 2003
Posts: 20
Likes: 0
Default

Originally Posted by Scott.T
You can ping off the security tab on the Star/Torx hex bolt with a small screwdriver, then use a normal Star/Torx tool
Hi,

Make sure when you order the MAF that you just ask for the censor otherwise you will end up with the whole unit and that will cost you aboiut £300 !!!!!
Reply
Old Jun 23, 2004 | 09:43 AM
  #7  
teajunkie's Avatar
teajunkie
Thread Starter
Scooby Regular
 
Joined: May 2004
Posts: 185
Likes: 0
From: devon
Default

thanks guys i have contacted scooby dealer and it is covered by warranty so they are changing it tuesday.

thanks very much for all your help.
Reply
Old Jun 23, 2004 | 09:46 AM
  #8  
richiewong's Avatar
richiewong
Twatful
 
Joined: Apr 2003
Posts: 9,050
Likes: 0
From: Grew up and don't drive Scoobs anymore!
Default

.....or it could be your lambda sensor
Reply
Old Jun 23, 2004 | 04:33 PM
  #9  
teajunkie's Avatar
teajunkie
Thread Starter
Scooby Regular
 
Joined: May 2004
Posts: 185
Likes: 0
From: devon
Default

whats a lambada sensor?????
Reply
Old Jun 23, 2004 | 05:03 PM
  #10  
SiHethers's Avatar
SiHethers
Scooby Regular
 
Joined: Dec 2002
Posts: 349
Likes: 0
Default

Sits in downpipe, essential for optimum catalyst efficiency when idling or at cruise. Causes the same idle hunting when on the way out.
Reply
Old Jun 23, 2004 | 08:08 PM
  #11  
teajunkie's Avatar
teajunkie
Thread Starter
Scooby Regular
 
Joined: May 2004
Posts: 185
Likes: 0
From: devon
Default

can this lambda sensor be cleaned ????
or does it have to be replaced?
if replaced how much
Reply
Old Jun 23, 2004 | 10:35 PM
  #12  
stevem2k's Avatar
stevem2k
Scooby Regular
 
Joined: Sep 2001
Posts: 4,670
Likes: 0
From: Kingston ( Surrey, not Jamaica )
Default

About 130quid . Looks like a spark plug with 2 heater wires and a signal.

Signal should read .9v+ at WOT if it's ok.

How many miles on your motor ?

Steve
Reply
Old Jun 24, 2004 | 01:46 PM
  #13  
teajunkie's Avatar
teajunkie
Thread Starter
Scooby Regular
 
Joined: May 2004
Posts: 185
Likes: 0
From: devon
Default

69000 only had it a month so still under warranty!

just had prodrive backbox fitted (£478) apart from that it's still standard.
Reply
Old Jun 24, 2004 | 01:53 PM
  #14  
SiPie's Avatar
SiPie
Scooby Regular
 
Joined: Apr 2002
Posts: 7,249
Likes: 0
From: Scotland
Red face

just had prodrive backbox fitted (£478)
FFS

You'll be glad you found scoobynet and you can now get things at realistic prices ...

.. you have been acutely rippied off
Reply
Old Jun 24, 2004 | 02:03 PM
  #15  
stevem2k's Avatar
stevem2k
Scooby Regular
 
Joined: Sep 2001
Posts: 4,670
Likes: 0
From: Kingston ( Surrey, not Jamaica )
Default

@ 69k that lambda is going to be tired too ( assuming it's original )

S
Reply
Old Jun 24, 2004 | 06:12 PM
  #16  
teajunkie's Avatar
teajunkie
Thread Starter
Scooby Regular
 
Joined: May 2004
Posts: 185
Likes: 0
From: devon
Default

i know i was quoted £370 for backbox and then they charged me £478 i did complain and so they dropped labour rate from £65 ph to £55 ph.

still didnt relieve the pain in the wallet.

i will get them to check lambda sensor when it's in tuesday.

thanks guys
Reply
Old Jun 30, 2004 | 08:42 PM
  #17  
teajunkie's Avatar
teajunkie
Thread Starter
Scooby Regular
 
Joined: May 2004
Posts: 185
Likes: 0
From: devon
Thumbs up Idle problems solved

I took my car in to scooby dealer today and they changed the MAF sensor (hoooray!!!)
~But not all's well after washing and a vacum testdrive and 1hr 25mins they realised oh no it's not the MAF at fault.
After all the time i spent waiting for the repair it was the lambda sensor....
they only changed it cause i told them about your advise on scoobynet.

I thought they were supposed to have diagnostic gear????

finally after 2 & a half hrs my car runs like it was supposed to.

And all covered by warranty.

Thanks guys my car would be runing like a bag of poo if it wasnt for great advice from scoobynet members.
Reply
Old Jun 30, 2004 | 09:08 PM
  #18  
olliecampbell's Avatar
olliecampbell
Scooby Regular
iTrader: (3)
 
Joined: Aug 2003
Posts: 2,699
Likes: 0
From: AL4 | W1B
Default

Still under warranty? Thats lucky
Reply
Old Jun 30, 2004 | 10:25 PM
  #19  
teajunkie's Avatar
teajunkie
Thread Starter
Scooby Regular
 
Joined: May 2004
Posts: 185
Likes: 0
From: devon
Default

it came with 12mths when i bought it just over a month ago!!!

they have been really good at the garage.
dont know how long that will last though....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
S600HBY
Subaru Parts
7
Sep 30, 2015 11:24 AM
Scooby_Lee101
General Technical
3
Sep 26, 2015 12:04 AM
MightyArsenal
Wheels, Tyres & Brakes
6
Sep 25, 2015 08:31 PM
tjapplejuice
Drivetrain
9
Sep 25, 2015 03:46 PM
Baskey
General Technical
3
Sep 25, 2015 03:45 PM


Thread Tools
Search this Thread

All times are GMT +1. The time now is 01:43 PM.