how can i fit a TD05/06-20g on my96 ?
#1
how can i fit a TD05/06-20g on my96 ?
i've received by andy a beautifull td05/06-20G and i'm going to fit it on my impreza my96 (so, with the 90° turbo entry)
Andy has send this with a samco hose to make the 90° entry, that's ok
i'm going to fit my td05/06-20g on my MY96 car but i've some troubles....
i've find an adaptator to fit my inlet plenum on the samco hose, that's ok...but the samco is posed on the inlet manifold...and i don't see how i can do to put the inlet plenum (which remove the 2nd resonator after maf) with the waste gate which is very large....if you have some photo or/and the solution to my troubles, i thank you to say me how i can do that...
edit for photo
Andy has send this with a samco hose to make the 90° entry, that's ok
i'm going to fit my td05/06-20g on my MY96 car but i've some troubles....
i've find an adaptator to fit my inlet plenum on the samco hose, that's ok...but the samco is posed on the inlet manifold...and i don't see how i can do to put the inlet plenum (which remove the 2nd resonator after maf) with the waste gate which is very large....if you have some photo or/and the solution to my troubles, i thank you to say me how i can do that...
edit for photo
Last edited by RicouGT; 08 June 2004 at 07:23 PM.
#3
Originally Posted by Andy.F
I'll try and get you some pics of how Jonny Gav done this on his car of the same year.
I'm not sure how he done it but it sure works well !!
Andy
I'm not sure how he done it but it sure works well !!
Andy
is there only jonny who has fitted this turbo on a >96 car ?
#5
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
is that bolted to the up-pipe? is the top bracket on?
cut a little off one end of the samco as it will need a tight bend.
cut a little off one end of the samco as it will need a tight bend.
#6
is that bolted to the up-pipe? is the top bracket on?
cut a little off one end of the samco as it will need a tight bend
cut a little off one end of the samco as it will need a tight bend
#7
Subaru Tuning Specialist
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
The 20G is only a few mm longer than the 16G FE so a similar set up should fit. I initially thought the tight 90 degree bend would limit the power but it doesn't. The larger bore must compensate.
Trending Topics
#8
i remember you i've the original airbox, the fitting showed for the td05fe is approximately same as mine concerning the turbo fitting...
is there anyone who has fitted this turbo on a 95/96 except jonny gav ?
is there anyone who has fitted this turbo on a 95/96 except jonny gav ?
#9
Originally Posted by Andy.F
The 20G is only a few mm longer than the 16G FE so a similar set up should fit. I initially thought the tight 90 degree bend would limit the power but it doesn't. The larger bore must compensate.
Do you do the TD05/06 20G with a 90 degree entry cover? Would that still fit and make it easier for the earlier cars with 90 degree entry turbos?
What;s involved in fitting a FE turbo to an engine that came with a 90 degree entry turbo, ?
Ta
Neil
#11
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by David_Wallis
is that bolted to the up-pipe? is the top bracket on?
cut a little off one end of the samco as it will need a tight bend.
cut a little off one end of the samco as it will need a tight bend.
Tell you want send me the turbo and samco and I'll fit it to my car and test it out for you
Simon
#12
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Bolt the turbo up loosely first.. holding it in by hand never works well enough to see where things fit.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM