Using a Trolley Jack; where to locate?
#1
Scooby Regular
Thread Starter
Join Date: Aug 2003
Location: Fylde area -"http:/www.ladsoc.co.uk/"
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Can anyone give me some advice on where, or more importantly where NOT to locate a trolley jack? Just for general underneath inspections and wheel changes etc. Any spots to aviod?
(my93 JDM WRX)
Cheers
(my93 JDM WRX)
Cheers
#2
Scooby Regular
Join Date: Sep 2002
Location: Cumbrian Scoobs
Posts: 2,616
Likes: 0
Received 0 Likes
on
0 Posts
There are three main jacking points I use.
1) Under rear differential
2) Under tie plate on front cross member
3) Just in front of rear wheels on the rear diff lateral braces
As for where NOT to locate it, be very careful underneath the floor pan as most of parts under there are very thin metal.
1) Under rear differential
2) Under tie plate on front cross member
3) Just in front of rear wheels on the rear diff lateral braces
As for where NOT to locate it, be very careful underneath the floor pan as most of parts under there are very thin metal.
#3
avoid everywhere but the jacking points!
Which are....
Front towhooks
Rear Diff (diff moves on mounts a little, don't worry)
Plate under front subframe (right under steering rack)
Main chassis rails on sides but ONLY with wide jack cradle or load spreader.
You can also jack/stand on anti roll bar mounts.
Emergency jack straddles main seam on bottom of sill.
Paul
Which are....
Front towhooks
Rear Diff (diff moves on mounts a little, don't worry)
Plate under front subframe (right under steering rack)
Main chassis rails on sides but ONLY with wide jack cradle or load spreader.
You can also jack/stand on anti roll bar mounts.
Emergency jack straddles main seam on bottom of sill.
Paul
#4
Scooby Regular
Join Date: Sep 2003
Location: Isle of Wight
Posts: 2,720
Likes: 0
Received 0 Likes
on
0 Posts
Emergency jack straddles main seam on bottom of sill.
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM