Wiring Diag for Blitz SBC ID boost controller?
16 November 2003, 12:23 AM
#1
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
A mate has just got one of these for his Rover I'm re-building, but being as he got it off e-bay second hand, it's come with no instructions.
Just need some wiring diags to work from and I'll be sorted.
Cheers
Andy
Just need some wiring diags to work from and I'll be sorted.
Cheers
Andy
16 November 2003, 12:42 AM
#2
Scooby Regular
Join Date: May 2003
Posts: 3,139
Likes: 0
Received 0 Likes
on
0 Posts
Source:
Blitz USA
www.blitz-na.com
Aesthetics: Small and simple.
Ease of installation: Power and ground, boost line into the cabin, plus some stupid pressure fittings.
Clarity of instructions: Not really needed, which is good, since they kinda suck. Available on the Web site.
Features: Four boost settings; Laggy (auto) or responsive (manual) boost mode; overboost warning and protection; sorta-though-not-really scramble boost; peak-hold boost display; choice of boost units (psi, bar, kg/cm2, and kPa); three alternate data input channels for display of digital or voltage readings (TPS, MAF, O2, etc.), logging and replay of boost and optional channels.
and if you are really lazy............
http://www.team3s.com/Blitz%20SBC%20i-D%20manual.pdf
[Edited by fuz - 11/16/2003 12:48:37 AM]
Blitz USA
www.blitz-na.com
Aesthetics: Small and simple.
Ease of installation: Power and ground, boost line into the cabin, plus some stupid pressure fittings.
Clarity of instructions: Not really needed, which is good, since they kinda suck. Available on the Web site.
Features: Four boost settings; Laggy (auto) or responsive (manual) boost mode; overboost warning and protection; sorta-though-not-really scramble boost; peak-hold boost display; choice of boost units (psi, bar, kg/cm2, and kPa); three alternate data input channels for display of digital or voltage readings (TPS, MAF, O2, etc.), logging and replay of boost and optional channels.
and if you are really lazy............
http://www.team3s.com/Blitz%20SBC%20i-D%20manual.pdf
[Edited by fuz - 11/16/2003 12:48:37 AM]
16 November 2003, 12:50 AM
#3
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
never thought to check blitz site first, what an **** !
I used search on here though.
<stands up>
My name is Andy and I'm a scoobynet addict.
<sound fx>
Clapping
</sound fx>
</sits down>
Andy
I used search on here though.
<stands up>
My name is Andy and I'm a scoobynet addict.
<sound fx>
Clapping
</sound fx>
</sits down>
Andy
Thread
Thread Starter
Forum
Replies
Last Post
