k9any

Any one got one of these fitted?

How goos are they?

Thinking of getting one for my 97 UK Wagon...anyone intrested in group buy?

Ray

k9any

Supposed to be 'how good are they?'

exesspeed

fitting the new hks evc 5 psi version, with the lcd screen you also nee other things beside just the controller, mark

k9any

how many different settings can you have?

Delboy2

Am using an HKS EVCIV boost controller, very pleased with it, excellent control

exesspeed

delboy where is the stepping motor , fitted, under your bonnet, and could you take a pic at all. mark

Delboy2

The boost solenoid/pressure transducer is under the bonnet, I will take a photo and either send it to ya or post it on here.

exesspeed

thank's that will help me a lot, did you fit it your self, if so was it as easy as the instruction's seem to read, mark

Delboy2

If you look at the left side of the piccy behind the suspension turret you can see a black box with 3 pipes going to it, that is my solenoid/pressure transducer. I fitted the boost controller myself with no instructions. Only downloaded set-up instructions.
Hope this helps



[Edited by Delboy2 - 7/14/2003 10:15:16 PM]

exesspeed

nice one del, yea ive downloaded the instruction,s to, and ive looked at them and look,s quite simple, if i can just make out where they recon the pipe,s go yove 2, - 6mm hoses and a 4 mm, hose the 3 pipe,s coming off as mine is called the stepping motor, are numbered, o-i-B to where did you run yours too, also did you use the boost adjuster that has the boost readout built into the adjuster, as the one ive managed to get is the EVC-5 version 2 its not for sale yet in the uk, it now reads with a seperate lcd monitor ,in psi, either didgital or analouge, and this is a seperate unit that plugs into the rear of youe boost adjuster, and both units have seperate, cpu's in them now, you can read about the new one on hks usa home page, but as yet they only have instruction,s for last years evc-5 which only had a single cpu, and didnt show psi on the lcd monitor, mark

James_Harvey

I'm selling an EVC IV for £300.
Email me if you are interested.

It's a great piece of Kit

James.

Delboy2

I agree with ya mate, excellent piece of kit

exesspeed

allready got the kit its the psi version not forsale as yet in the uk, looks the same as the kpa version and its got the lcd ,digitsl screen got it all new for £380 , mark

Delboy2

Have you sussed the piping for ya solenoid yet? If ya haven't send me a piccy of it and I will try and help ya.

exesspeed

if you go too hks. usa .com home page on the first page under the news bit you will see hks- ez -1v, now psi version you will see a pic of it looks exactly like the one in the uk now evc-5, but its in psi, and has 2 cpu's one in each unit for faster responce,
http://www.hksusa.com/ look under produc.s new evc 5 with psi and you will go to it, off that. im e.mailin you a pic of the set, and you will see pic of stepping motor, going to try to fit it tomoro.

exesspeed

this is the pic hope its ok, the part your looking for ,stepping motor is the one thats all black with the 3 tube,s coming out of it