AndrewC

I presume that's with the pressure/vacuum line attached.

I believe the norm is 3bar with the pipe disconnected, ie. regulator referenced at atmospheric pressure, also this is about the pressure at which injectors are rated.

Andrew...

[Edited by AndrewC - 7/2/2003 9:50:50 PM]

Fuzz

I'm doing all the little fiddly jobs on the sccob whilst I wait for some other bits to come in, However!
Looking back on my mails, I have lost what fuel pressure to run the FSE at (1:1 ratio with 740's) ?

she's idling at 2.0 BAR at the mo (out of the box setting)

Andy

Bob Rawle

Fuzz, set it to 3.2 bar at hot idle vac pipe connected. this will work the injectors best, does it have a guage as you may want to set it a bit lower until its sorted otherwise it_will_be_overfueling.

bob

Fuzz

Yes Bob, Gauge is permanent fit.
Do you mean set it at 3.2 Bar with the 380's until we get chance to set it up?
The 740's have yet to arrive.
I may well be ringing you at the end of the week !

Cheers
Andy C