CoilPack Connections... Which is +
#1
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Right, fitting bosch MEC723's these are marked with + and -, however which is which on the loom? Red and yellow?? (they also look like red goes to yellow and yellow to red at the connector)
David
[Edited by David_Wallis - 10/14/2002 10:52:31 AM]
David
[Edited by David_Wallis - 10/14/2002 10:52:31 AM]
#3
Scooby Regular
iTrader: (1)
Join Date: Mar 2002
Location: Norn Iron
Posts: 2,786
Likes: 0
Received 0 Likes
on
0 Posts
The red one that goes to the coil is +ve. The yellow is the trigger wire, -ve.
Just switch the ign on, and test the plug on the engine loom, with a voltmeter or similar to ground.
Just switch the ign on, and test the plug on the engine loom, with a voltmeter or similar to ground.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM