autometer AFR fitting?
#1
Scooby Regular
Thread Starter
Join Date: Oct 2001
Location: Here, there and everywhere
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
ive just got my new autometer ultralite AFR, anyone have the same AFR and how did you wire it up?
are there any instructions, Im fitting this to a UK MY98.
i know i have to solder one of the wires to a wire on the bottom block of the ecu, but which one?
cheers
chris
edited to add, the afr has 3 wires, Black, Red and Purple.
[Edited by CHRIS_D - 9/2/2002 9:54:47 AM]
are there any instructions, Im fitting this to a UK MY98.
i know i have to solder one of the wires to a wire on the bottom block of the ecu, but which one?
cheers
chris
edited to add, the afr has 3 wires, Black, Red and Purple.
[Edited by CHRIS_D - 9/2/2002 9:54:47 AM]
#2
Scooby Regular
Thread Starter
Join Date: Oct 2001
Location: Here, there and everywhere
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
Andy
i think john wants to see a pic of the AFR installed in the pod and how it looks rather than how its installed electrically (am i right john? ). cos i still aint got a clue which wire i need to put in on yet.
however i found this quite helpful:
here
just click on wiring (you'll need to download adobe acrobat if you havnt got it), and look for you're MY ECU. its for an apexi turbo timer but it tells you where the O2 sensor and a ground is.
just need to check it with regards to my ECU wires.......................again!
andy, i dont suppose you still have those instructions do you, i lost the last set you sent me.
Oh, BTW John YHM
chris
edited to say " wahey!!!!!......i got the link right first time"
[Edited by CHRIS_D - 9/3/2002 9:38:21 PM]
i think john wants to see a pic of the AFR installed in the pod and how it looks rather than how its installed electrically (am i right john? ). cos i still aint got a clue which wire i need to put in on yet.
however i found this quite helpful:
here
just click on wiring (you'll need to download adobe acrobat if you havnt got it), and look for you're MY ECU. its for an apexi turbo timer but it tells you where the O2 sensor and a ground is.
just need to check it with regards to my ECU wires.......................again!
andy, i dont suppose you still have those instructions do you, i lost the last set you sent me.
Oh, BTW John YHM
chris
edited to say " wahey!!!!!......i got the link right first time"
[Edited by CHRIS_D - 9/3/2002 9:38:21 PM]
#3
Scooby Regular
Join Date: Mar 2001
Location: Derbyshire
Posts: 4,496
Likes: 0
Received 0 Likes
on
0 Posts
Have a look here http://www.scoobynet.co.uk/bbs/threa...hreadid=121306
The red is switched positive power, black is neg, purple signal.
The red is switched positive power, black is neg, purple signal.
#4
Scooby Regular
Join Date: Mar 2001
Location: Derbyshire
Posts: 4,496
Likes: 0
Received 0 Likes
on
0 Posts
Oops ignore that...it's for a 94
There was a thread that told you, but I can't remember where it is and search seems to have gone belly up....
I'll have a look and see if I can find it
There was a thread that told you, but I can't remember where it is and search seems to have gone belly up....
I'll have a look and see if I can find it
#5
Scooby Regular
Join Date: Mar 2001
Location: Derbyshire
Posts: 4,496
Likes: 0
Received 0 Likes
on
0 Posts
#6
Scooby Regular
Join Date: Feb 2002
Location: oustide the asylum?
Posts: 3,306
Likes: 0
Received 0 Likes
on
0 Posts
Just a quick hijack....
Is the Autometer AFR gauge a standard 52mm thing, or is it smaller? All the pics I've seen are unclear on this.
Hope you can help. Thanks.
Is the Autometer AFR gauge a standard 52mm thing, or is it smaller? All the pics I've seen are unclear on this.
Hope you can help. Thanks.
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Oct 2001
Location: Here, there and everywhere
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
BTT
ive had a look on ravensblades site, and although he says which wire it is (inc a MY98) its not the same as on my ecu.
imn ok woth a ll the wire bar the purple one, i know it goes t othe lamda sensor, but which wire is this on the ecu?
ive had a look on ravensblades site, and although he says which wire it is (inc a MY98) its not the same as on my ecu.
imn ok woth a ll the wire bar the purple one, i know it goes t othe lamda sensor, but which wire is this on the ecu?
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM