What PSI??
#3
Hi m8,
Bog standard, should be around the 11psi mark (some are a bit higer, others lower), but I know yours in modded, so 9 is very low.
Try flushing out your boost solenoid and clean out or better renew the boost pipework. Mine did this (same MY as yours) and it was a dirty solenoid.
Cheers
Rich
Bog standard, should be around the 11psi mark (some are a bit higer, others lower), but I know yours in modded, so 9 is very low.
Try flushing out your boost solenoid and clean out or better renew the boost pipework. Mine did this (same MY as yours) and it was a dirty solenoid.
Cheers
Rich
#4
cheers, should the boost differ depending what gear you are accelerating in?? I thought boost would be constant whatever gear?
Modifications:
De-cat
Full S/S system
KnN Induction
Modifications:
De-cat
Full S/S system
KnN Induction
#5
Scooby Regular
Join Date: Oct 2001
Location: Bish,Bash,Bosham!
Posts: 2,204
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
Boost is load dependent so peak boost is only really achievable in 4th/5th gears (WideOpenThrottle). Mine is set to 15psi usind a Dawes device, but as standard before I cleaned the boost solenoid it was 11psi. After cleaning it went up to 13psi
J
Boost is load dependent so peak boost is only really achievable in 4th/5th gears (WideOpenThrottle). Mine is set to 15psi usind a Dawes device, but as standard before I cleaned the boost solenoid it was 11psi. After cleaning it went up to 13psi
J
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
14
25 September 2015 02:33 PM
aaron_ions
General Technical
1
17 September 2015 10:42 AM
Richard Gledhill
ScoobyNet General
3
19 January 2001 09:54 PM