Racing Dawes Stuck Open :(
#1
Just had my racing Dawes device stick open on me.Not too sure how, i think it may have not seated correctly when i`ve come off boost, anyone else had this problem?
Rich.
Rich.
#2
Scooby Regular
iTrader: (1)
Join Date: Mar 2002
Location: North East Subaru Forum
Posts: 3,920
Likes: 0
Received 0 Likes
on
0 Posts
yeah me,took it to bits and cleaned it out and its been ok since
inside is a ball and spring,used break cleaner to clean the crap that had built up inside it.
5 min job.
inside is a ball and spring,used break cleaner to clean the crap that had built up inside it.
5 min job.
#3
hmm, i can understand that then, but mines only two weeks old!
I can only presume its sticking on something, as when you unscrew it it moves back into place, though everything looks fine inside, no burrs or anything.
Rich.
I can only presume its sticking on something, as when you unscrew it it moves back into place, though everything looks fine inside, no burrs or anything.
Rich.
#5
When the Dawes stuck open, it was allowing full pressure to the wastegate as it was made by the turbo, and as such the car was only boosting to 0.7bar, instaed of the 1.5 bar i normally run at, so the fuel cut wasnt an issue thankfully
Rich.
Rich.
Trending Topics
#8
Scooby Regular
Join Date: May 1999
Location: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Posts: 2,637
Likes: 0
Received 0 Likes
on
0 Posts
Fit an oil catch tank, to prevent oily crud gumming things up. Fit a second Dawes on the "boost" hose, as a fail safe.
Mark.
Mark.
#9
John , you do have a point i spose
Thanks for the replies guys, i`ll refit it tomorrow and give it alittle spray with PTFE, hopefully that might stop it jamming up in the future
Rich.
Thanks for the replies guys, i`ll refit it tomorrow and give it alittle spray with PTFE, hopefully that might stop it jamming up in the future
Rich.
#10
mine done it on track few months back.
thinking about it, it is the racing one as well? hmmmm could not get more than 0.8-0.9bar, never stopped me though from having fun and overtaking poeple
i just took it apart and stretched the spring a bit. so lets see if there is a trend developing here.
it happened to me ( 1.45bar) andyF (1.7bar) and yourself (1.5bar)
maybe the dawes does not like highboost. it could be an oil catch issue, i think it is the spring though.
sam
thinking about it, it is the racing one as well? hmmmm could not get more than 0.8-0.9bar, never stopped me though from having fun and overtaking poeple
i just took it apart and stretched the spring a bit. so lets see if there is a trend developing here.
it happened to me ( 1.45bar) andyF (1.7bar) and yourself (1.5bar)
maybe the dawes does not like highboost. it could be an oil catch issue, i think it is the spring though.
sam
Thread
Thread Starter
Forum
Replies
Last Post
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM