Key won't move in ignition?(Impreza 1999)
#1
Scooby Newbie
Thread Starter
Join Date: May 2024
Location: Belfast
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Key won't move in ignition?(Impreza 1999)
I recently bought my first Subaru Impreza its a 1999 1.6 Lr. It started fine with no problems with the key and ignition from over a month, I brought it to get welding done once done and I went to start the car it would not start and the key wont work, the steering lock was on and after 30 minutes of messing with it I finally got the key turned once and it started I drove it home and then when I got back and went to start it again the problem continued. Has any one else experienced this or know what could cause this. I can't tell if its the key being worn down or not, the immobiliser turns off when the key is inserted and the door locks work fine with the key
#2
Scooby Regular
Sounds as it the key maybe worn, not depressing the tumbler pins fully in the barrel to release the steering lock......... or the lock has siezed.
The (ECU) immobiliser (red key image on dash) turns off as it recognises the transponder chip in the key.
The (ECU) immobiliser (red key image on dash) turns off as it recognises the transponder chip in the key.
Thread
Thread Starter
Forum
Replies
Last Post