Notices

Key wont turn in ignition

Thread Tools
 
Search this Thread
 
Old 28 February 2008, 09:16 PM
  #1  
rickon
Scooby Newbie
Thread Starter
 
rickon's Avatar
 
Join Date: Feb 2008
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default Key wont turn in ignition

Hello,

My key wont turn in the ignition, it was dodgy today and took a few goes for it to turn, but no it just wont turn at all.

The key works fine in all doors, but i can't get it to turn in the lock.

I've tried putting WD40 on the key, but it didn't help.

Is there something i'm missing, do i need to do something before turning the key?

The red light on my immobilizer dash display goes out as soon as the key is in the ignition.

Dead unhappy, I've just spent loads of money on it and now it wont even start sad.gif

Help!
Old 28 February 2008, 10:59 PM
  #2  
Glowplug
Scooby Regular
iTrader: (8)
 
Glowplug's Avatar
 
Join Date: Jan 2008
Location: On The Road!
Posts: 5,027
Likes: 0
Received 0 Likes on 0 Posts
Default

Have you tried inserting the key with your left hand and turning it with your teeth whilst holding the clutch down with your other hand?? Guess not!!
Could be many things fella, lock barrel colapsed or a steering lock problem
What would i do? After doing all i could to no avail and all ways needing my motor on the road, id call the pro's, dont quite know who without looking but.........
Old 28 February 2008, 11:06 PM
  #3  
rbaz
Scooby Regular
iTrader: (1)
 
rbaz's Avatar
 
Join Date: Jan 2008
Location: France
Posts: 1,695
Likes: 0
Received 0 Likes on 0 Posts
Default

This may sound stupid and I apologise if you know/tried this but is the standard steering lock on and putting pressure on the lock?
Try rocking the wheel backwards and forwards as you turn the key.
Old 29 February 2008, 11:24 AM
  #4  
satancom
Scooby Regular
 
satancom's Avatar
 
Join Date: Sep 2007
Location: Swansea (ish)
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts
Default

Had this once on my impreza.. it was my fault as i had been using the key to open up boxes and had some gunk left on the key... worked fine in the door lock, but the ignition didn't wanna know.

Took the key out and scrbed it about a bit and its been fine ince! ALso worth releasing the preasure of the sttering lock as suggested above
Old 29 February 2008, 10:11 PM
  #5  
rigga
Scooby Regular
iTrader: (4)
 
rigga's Avatar
 
Join Date: May 2005
Location: midlands......
Posts: 1,966
Likes: 0
Received 0 Likes on 0 Posts
Default

Mine does it sometimes,but strangly if i remove the key,turn it 180 degrees and re insert it it turns straight away......strange but true lol
Old 01 March 2008, 10:41 PM
  #6  
rickon
Scooby Newbie
Thread Starter
 
rickon's Avatar
 
Join Date: Feb 2008
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by rigga
Mine does it sometimes,but strangly if i remove the key,turn it 180 degrees and re insert it it turns straight away......strange but true lol
Now figured out how to start it, i need to put the key in the ign, and pull it out ever so slightly and it will turn.

Is this gonna be a key or ignition problem? I have no code for my key, is there any way of getting another cut?
Old 02 March 2008, 12:08 PM
  #7  
thedeester1
Scooby Regular
 
thedeester1's Avatar
 
Join Date: Nov 2004
Posts: 282
Likes: 0
Received 0 Likes on 0 Posts
Default

You need to have a new key cut. ask the key cutter to add a thou' to the key...they can do this with the follow mechanism.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SilverM3
ScoobyNet General
8
24 February 2021 01:03 PM
toyney83
General Technical
10
02 October 2015 08:38 PM
ALEXSTI
General Technical
5
28 September 2015 09:29 PM
StueyBII
General Technical
4
26 September 2015 12:35 PM
StueyBII
General Technical
0
25 September 2015 05:58 PM



Quick Reply: Key wont turn in ignition



All times are GMT +1. The time now is 11:34 AM.