Hi Guys hope someone can point me in the right direction.
I have a 95 WRX STI import which I have decided to re-commission, the car was running ok and then suddenly won't re-start.
We have put a new battery on, checked all fuses and relays, continuity through the wiring to the pump.
There is no voltage to the pump. I am wondering if this could be an immobiliser issue. If so could I have a recommendation how to verify this and if anyone recommends an auto electrician in Kent are thanks. John
I am wondering

 

The car wont have come with an alarm from the factory, so first question is what alarm has been fitted?
Knowing the alarm means finding the installation manual, so you then know what colour wires you need to find for the immobiliser circuit.
hth

 

Hi Thanks for the reply
The alarm is a Clifford, I have the fob which is a G3.
I will have to take the dash apart to see if I can find the control box and hope I can find an instal manual.
Thanks again.