lazscooby

iTrader: (2)

My driver side oil control valve for the avcs is weeping oil. I noticed that the inlet ones slide out and o rings can be replaced. Does anyone know if the exhaust one slides out to replace the o ring?
part number is 10921AA060.
cheers
chris

MOTORS S GT

iTrader: (2)

Its usually the gasket between the avc's control block & the head that leaks, not the o ring on the solonoid, you will have to unbolt it to remove the solonoid anyway, so you can change both.

Don Clark

I think you will find the Part number for the RH Exhaust AVCS valve is 10917AA60 and the LH Exhaust AVCS is 10917AA070


As it has a similar retaining bolt arrangement to the inlet items it may very well do, but haven't tried it.

Gaskets are RH - 10924AA001; LH - 10924AA011

The Inlet AVCS valve is 10921AA080 upto MY10 and then 10921A140 from MY11

lazscooby

iTrader: (2)

Great info thanks. Will the o rings be the same for inlet and exhaust?

cheers

chris

WUZ

iTrader: (14)

No sure if the O-rings on the Exhaust Solenoids are the same, but the Gaskets are LH and RH as Don has intimated above