Has anyone got a guide for installing the power feeds to Prosport Gauges? on a 2006 wrx sti

3 will be on the a pillar, and one in the driver side airvent

 

 

do you like my customer made 3 pod a pillar for hawkeye(newage) tehe

 

Anyone able to give me some guidance?

 

Not sure really what you want to know, it's pretty straight forward but this should help...

https://www.scoobynet.com/interior-1...and-boost.html

 

Its the electrical side of things as to what wires go where as I want to do this myself and my mechanic then only needs to worry about the actual sensors. ill have a look at the guide cheers

 

Ah ok, most people tap into the wiring for the clock, it's got the 4 wires you need right there.
Alternatively there's an accessory socket under the dash (above the pedals) that the factory fit defi genome gauges plug into, if you want the pin info for that then I can send it over later but to be honest clock wiring is the simplest.

Cheers.

 

If you can send all across that would be helpful. As all Gauges are all on the a pillar/vent the wiring would be closer to the accessory socket than the clock