Blob centre exhaust length
01 September 2018, 04:55 PM
Scooby Regular
Thread Starter
Join Date: Mar 2006
Location: Browsing through a copy of Razzle
Posts: 12,613
Blob centre exhaust length
Does anyone know the length of a centre section on a blobeye. Mine seems to be about 6inch too short. Are there 2 lengths
01 September 2018, 06:28 PM
Scooby Regular
Join Date: Apr 2011
Location: hinckley
Posts: 8,445
Quote:
Originally Posted by
powerwrx
Does anyone know the length of a centre section on a blobeye. Mine seems to be about 6inch too short. Are there 2 lengths
does it not affect the length if it's decatted? Or maybe You Have a section from a classic.
01 September 2018, 06:43 PM
Scooby Regular
Join Date: Feb 2003
Location: Harpenden
Posts: 7,557
Quote:
Originally Posted by
powerwrx
Does anyone know the length of a centre section on a blobeye. Mine seems to be about 6inch too short. Are there 2 lengths
UK Newage about 1260mm (shorter due to extra length required for 2nd cat section of downpipe)
UK Classic about 1350mm
Early JDM Newage 1350mm
Last edited by Don Clark; 01 September 2018 at 06:45 PM .
01 September 2018, 06:47 PM
Scooby Regular
Thread Starter
Join Date: Mar 2006
Location: Browsing through a copy of Razzle
Posts: 12,613
Hmmm mines approx 127cm or 1270mm
wonder if its my downpipe then thats too short.
01 September 2018, 06:49 PM
Scooby Regular
Thread Starter
Join Date: Mar 2006
Location: Browsing through a copy of Razzle
Posts: 12,613
Quote:
Originally Posted by
Don Clark
UK Newage about 1260mm (shorter due to extra length required for 2nd cat section of downpipe)
UK Classic about 1350mm
Early JDM Newage 1350mm
is there a longer centre section that replaces the 2nd cat pipe too..
01 September 2018, 07:00 PM
Scooby Regular
Join Date: Feb 2003
Location: Harpenden
Posts: 7,557
Quote:
Originally Posted by
powerwrx
is there a longer centre section that replaces the 2nd cat pipe too..
Not normally as the joint between downpipe and centre pipe is "usually" a donut joint to allow some flex in the system.
UK Newage system using Subaru naming policy for the different sections
01 September 2018, 07:09 PM
Scooby Regular
Join Date: Feb 2003
Location: Harpenden
Posts: 7,557
Is the down pipe OEM standard, or has someone fitted a one piece sports cat/decat version and fitted the wrong type??
Last edited by Don Clark; 01 September 2018 at 07:12 PM .
01 September 2018, 07:18 PM
Scooby Regular
Thread Starter
Join Date: Mar 2006
Location: Browsing through a copy of Razzle
Posts: 12,613
Quote:
Originally Posted by
Don Clark
Is the down pipe OEM standard, or has someone fitted a one piece sports cat/decat version and fitted the wrong type??
its got a 3" decat system fitted.. the backbox and centre section are 1 piece and fit to the downpipe using a flat gasket. (Not donut)
01 September 2018, 07:59 PM
Scooby Regular
Join Date: Feb 2003
Location: Harpenden
Posts: 7,557
If you are trying to mix and match 3" versions then there's your problem. Would have been handy to know at the start......
01 September 2018, 08:01 PM
Scooby Regular
Thread Starter
Join Date: Mar 2006
Location: Browsing through a copy of Razzle
Posts: 12,613
Quote:
Originally Posted by
Don Clark
If you are trying to mix and match 3" versions then there's your problem. Would have been handy to know at the start......
so its the fact its 3"?
never had an issue mix and matching 2.5" parts
02 September 2018, 07:46 AM
Scooby Regular
Join Date: Feb 2003
Location: Harpenden
Posts: 7,557
Quote:
Originally Posted by
powerwrx
so its the fact its 3"?
never had an issue mix and matching 2.5" parts
The fact it wasn't OEM but decatted and thus doesn't conform to the usual 4 piece newage pattern.
Looks as if you've got a Classic down pipe with a Newage centre pipe = 4-6" gap.
Last edited by Don Clark; 02 September 2018 at 07:48 AM .
02 September 2018, 10:39 AM
Scooby Regular
Thread Starter
Join Date: Mar 2006
Location: Browsing through a copy of Razzle
Posts: 12,613
Quote:
Originally Posted by
Don Clark
The fact it wasn't OEM but decatted and thus doesn't conform to the usual 4 piece newage pattern.
Looks as if you've got a Classic down pipe with a Newage centre pipe = 4-6" gap.
ye thts what i was thinking. Looks like ill have to get a custom made centre section for it
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Daphne01
ScoobyNet General
0
06 May 2015 09:44 AM
tomo21
General Technical
9
15 April 2015 05:40 PM
geordiesi
Subaru Parts
1
16 March 2013 06:54 PM
ravon
General Technical
3
12 January 2009 03:04 PM
TINO.wrx
ScoobyNet General
3
29 May 2007 07:13 PM