Front Bumper Support Bar
#1
Scooby Regular
Thread Starter
Join Date: Jul 2006
Location: West Sussex
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Front Bumper Support Bar
So I have a P1 and I need to replace the front Bumper Support bar, does anyone know if they are universal or do they differ from classic Pre/Post face lift and JDM to UK market
Basically i have found these 2 and wondering if wither will fit a Impreza P1
"JDM version"
https://www.importcarparts.co.uk/par...y=&searchPart=
"Uk Version"
https://www.importcarparts.co.uk/par...y=&searchPart=
Thanks in advance
Basically i have found these 2 and wondering if wither will fit a Impreza P1
"JDM version"
https://www.importcarparts.co.uk/par...y=&searchPart=
"Uk Version"
https://www.importcarparts.co.uk/par...y=&searchPart=
Thanks in advance
#2
Scooby Regular
Using my old P1's VIN the part number comes up as 57760FA680
Australia and Japan use 57760FA670
you could always phone them to confirm.....
Australia and Japan use 57760FA670
you could always phone them to confirm.....
#3
Scooby Regular
Thread Starter
Join Date: Jul 2006
Location: West Sussex
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
#5
Scooby Regular
Why?
Like all Subarus the P1 is/was a JDM based "production"car built for the UK market and as such has to comply with the UK's "The Road Vehicles (Construction and Use) Regulations 1986" .
Like all Subarus the P1 is/was a JDM based "production"car built for the UK market and as such has to comply with the UK's "The Road Vehicles (Construction and Use) Regulations 1986" .
Last edited by Don Clark; 17 August 2018 at 10:14 AM.
#6
Scooby Regular
iTrader: (6)
I've just replace my 99UK bar with a V4 STI bar, although there is a lot more to the earlier one it fits fine with no modification.
I was about to take a grinder to it but the bumper fitted over it fine, it just picks up on the same lower mounting points for the bumper. Guess the only issue would be if you're running a front mount Intercooler. The JDM spec ones appear to use a different number plate mount, the UK one screws to the bumper itself whereas the JDM one has the number plate mounts built into the bar.
I was about to take a grinder to it but the bumper fitted over it fine, it just picks up on the same lower mounting points for the bumper. Guess the only issue would be if you're running a front mount Intercooler. The JDM spec ones appear to use a different number plate mount, the UK one screws to the bumper itself whereas the JDM one has the number plate mounts built into the bar.
Last edited by Shane; 17 August 2018 at 04:53 PM.
Trending Topics
#11
Scooby Regular
iTrader: (46)
As for the reasons mentioned above.
Originally Posted by Don Clark
Why?
Like all Subarus the P1 is/was a JDM based "production"car built for the UK market and as such has to comply with the UK's "The Road Vehicles (Construction and Use) Regulations 1986" .
Like all Subarus the P1 is/was a JDM based "production"car built for the UK market and as such has to comply with the UK's "The Road Vehicles (Construction and Use) Regulations 1986" .
Last edited by jaygsi; 25 September 2018 at 07:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post
2danesimo
Wanted
1
22 January 2010 12:21 AM