2012 Subaru Impreza - Blower Fan only works on speeds 3 and 4
#1
Scooby Newbie
Thread Starter
Join Date: Jul 2018
Location: CT
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
2012 Subaru Impreza - Blower Fan only works on speeds 3 and 4
My AC / Heat only works on speeds 3 and 4. Speeds 1 and 2 do not work. I replaced the blower motor resistor but still have the same problem. What else can it be?
#3
Scooby Regular
Changing the blower resistor suggests that you have manual A/C.
Only other item is the blower switch itself, or switch to resistor wiring.
Only other item is the blower switch itself, or switch to resistor wiring.
#4
Scooby Newbie
Thread Starter
Join Date: Jul 2018
Location: CT
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Thank you Don. Correct it is manual ac. I'll try to find the fan switch and figure out where it is and how to replace it. I didn't find any parts called blower switch but found AC switch on autozone, but nothing that would fit the make and model.
I found this site below, could the switch be referenced as another name? Possibly the control module or the relay?
https://subarupartsamerica.com/parts...BLOWER%20MOTOR
It seems everything I can find online leads to the blower resistor but that seems to fix everyone's issue but mine.
I found this site below, could the switch be referenced as another name? Possibly the control module or the relay?
https://subarupartsamerica.com/parts...BLOWER%20MOTOR
It seems everything I can find online leads to the blower resistor but that seems to fix everyone's issue but mine.
Last edited by commguy10; 11 August 2018 at 10:28 PM.
#5
Scooby Regular
The switch is part of the heater control unit
https://www.subaruparts.com/oem-part...bC1oNC1nYXM%3D
Switch 6 connection socket shown below
https://www.subaruparts.com/oem-part...bC1oNC1nYXM%3D
Switch 6 connection socket shown below
Thread
Thread Starter
Forum
Replies
Last Post
stephen emery
General Technical
5
01 March 1999 01:49 AM