Rev hang
Thread Starter
Scooby Newbie
Joined: May 2015
Posts: 18
Likes: 0
From: essex
Rev hang
Have a 2001 bugeye which has what I believe is called rev hang very noticeable on gear changes 1 to 2 has usual mods like decat exhaust and Perrin air filter and fmic and been mapped so is the rev hang normal or sumthing that can be sorted
Sticking cable,sticking butterfly in throttle body,faulty nps,faulty tps or out of parameter range?
Just a number of things it could be.
These things can be checked with your eyes,some with a multimeter or some with a data (vag) cable and romraider software.
What map? Open source?
Just a number of things it could be.
These things can be checked with your eyes,some with a multimeter or some with a data (vag) cable and romraider software.
What map? Open source?
Do stuff that costs nowt first. Such as liberally spraying the throttle linkage with WD40. Then work it in by repeatedly moving the linkage back and forth. Then leave it for an hour to fully evaporate, before finally applying some light machine oil.
Also check the actual taughtness of the inner cable, and adjust as necessary.
Also check the actual taughtness of the inner cable, and adjust as necessary.
Last edited by joz8968; Mar 18, 2018 at 04:19 PM.
Thread
Thread Starter
Forum
Replies
Last Post