Classic brake lines - Do they fit both the sliding calipers and K-Sports/Brembos?
19 March 2018, 11:49 AM
#1
Classic brake lines - Do they fit both the sliding calipers and K-Sports/Brembos?
As title. I need to get a set but not sure if the rears will fit the ****ty V1 sliding calipers that are on there still. These will be addressed ASAP but for now, they'll need to fit.
Front is getting K-Sports as these have already been bought.
Front is getting K-Sports as these have already been bought.
20 March 2018, 11:37 AM
#3
Yes the standard hoses will fit on all the calipers , the newage hoses are all the same length and ends on them , the only difference is how the front hoses connect onto the front struts , the classic is held on with a clip , the newage are bolted onto the strut bracket
Cheers Ian
Cheers Ian
20 March 2018, 12:12 PM
#4
Thanks Ian. Can they be made to work or is it a cable tie bodge job? I'd rather do that as the car is being tracked this weekend then change them again down the line than stick with the rubber items to be honest!
Last edited by Jay Cartay; 20 March 2018 at 12:17 PM.
Thread
Thread Starter
Forum
Replies
Last Post
scottydouk
Subaru Parts
7
08 December 2015 09:20 PM
Dean'swrx
Wheels, Tyres & Brakes
3
28 August 2011 04:57 AM