Help... error Code "bank 1 lean`'
15 June 2002, 11:25 AM
#1
Scooby Regular
Thread Starter
Join Date: May 2002
Location: www.ayrshirescoobies.com
Posts: 2,079
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know this code on thier MY01 WRX.
Went to the garage and this was the error, as lastnite it was losing the revs, went for a quick blast after it was cleared and it didnt come back on.
Thanks in advance
Concerned RR
Went to the garage and this was the error, as lastnite it was losing the revs, went for a quick blast after it was cleared and it didnt come back on.
Thanks in advance
Concerned RR
17 June 2002, 09:04 AM
#4
Scooby Regular
Join Date: Oct 1998
Location: Scoobysport, Basildon, UK
Posts: 4,300
Likes: 0
Received 0 Likes
on
0 Posts
Rice Rocket
It sounds like you are running a fuel controller. These work by giving the ECU a lean signal, so it puts more fuel in.
On an 01/02 this will give a "bank 1 lean" error code.
It sounds like you are running a fuel controller. These work by giving the ECU a lean signal, so it puts more fuel in.
On an 01/02 this will give a "bank 1 lean" error code.
17 June 2002, 07:45 PM
#5
Scooby Regular
Thread Starter
Join Date: May 2002
Location: www.ayrshirescoobies.com
Posts: 2,079
Likes: 0
Received 0 Likes
on
0 Posts
Wel i did have a Dawes on it for about 2 weeks then removed, wasnt to sure about it. Would that cause it and after the ecu being rest will it clear.
Thanks
RR
Thanks
RR
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
