Turbo inlet pipe.
11 January 2018, 05:24 PM
#1
Scooby Newbie
Thread Starter
Join Date: Jul 2017
Location: Stockholm
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Turbo inlet pipe.
First of, not sure if this is the right section to ask.
How ever, I had too lift my intake in order too replace a water pipe that goes under it. I noticed that my turbo inlet pipe has a crack in it, so before I put the manifold back on I thought I would replace it.
How ever my question is, do I gain anything too upgrade too a 'bigger' one, or should I just go a head and get a OEM ?
This is on a Subaru GT gc8 2000.
How ever, I had too lift my intake in order too replace a water pipe that goes under it. I noticed that my turbo inlet pipe has a crack in it, so before I put the manifold back on I thought I would replace it.
How ever my question is, do I gain anything too upgrade too a 'bigger' one, or should I just go a head and get a OEM ?
This is on a Subaru GT gc8 2000.
11 January 2018, 06:00 PM
#2
Scooby Regular
Subaru GT gc8 2000 - same as a UK MY00 turbo 2000
Unless you are modding it and fitting a larger turbo then no real gain what so ever.
Fitting a Samco or similar silicon hose will probably improve the spool up a bit by smoothing out the air flow
Unless you are modding it and fitting a larger turbo then no real gain what so ever.
Fitting a Samco or similar silicon hose will probably improve the spool up a bit by smoothing out the air flow
Thread
Thread Starter
Forum
Replies
Last Post
silent running
General Technical
13
20 December 2006 12:05 PM
scoobboy
ScoobyNet General
7
05 September 2006 07:22 PM
vulnax999
General Technical
5
17 July 2006 04:03 PM