gauges
shadow pro are reportedly good gauges and prob the next best thing to defi,s. jura and latso had them in their awsome wagon and said they were good. still around 300 quid for the set of boost,oil temp and pressure so still not "cheap"
Cheers
Trending Topics
Hi there
Personally I would go with DeFi too,but you need to consider,if sensor is faulty,sensor will cost crazy money and be careful with their wiring,their pins are poor quality and they can be easy damaged and if you short the cable,you can easy kill controller,due this I'm no going again with DeFi,they're holding value,but if they go wrong,they will cost you money to replace
If budget doesn't allow DeFi then I would have look on Shadow Gauges,they're great gauges for money or you can have look on M7 Racing Meter SMD,I've now at EP3
http://www.m7japan.com/m7-product-el...t-intelli.html
Hope this helps
Thanks,Jura
Personally I would go with DeFi too,but you need to consider,if sensor is faulty,sensor will cost crazy money and be careful with their wiring,their pins are poor quality and they can be easy damaged and if you short the cable,you can easy kill controller,due this I'm no going again with DeFi,they're holding value,but if they go wrong,they will cost you money to replace
If budget doesn't allow DeFi then I would have look on Shadow Gauges,they're great gauges for money or you can have look on M7 Racing Meter SMD,I've now at EP3
http://www.m7japan.com/m7-product-el...t-intelli.html
Hope this helps
Thanks,Jura
Hi there
Personally I would go with DeFi too,but you need to consider,if sensor is faulty,sensor will cost crazy money and be careful with their wiring,their pins are poor quality and they can be easy damaged and if you short the cable,you can easy kill controller,due this I'm no going again with DeFi,they're holding value,but if they go wrong,they will cost you money to replace
If budget doesn't allow DeFi then I would have look on Shadow Gauges,they're great gauges for money or you can have look on M7 Racing Meter SMD,I've now at EP3
http://www.m7japan.com/m7-product-el...t-intelli.html
Hope this helps
Thanks,Jura
Personally I would go with DeFi too,but you need to consider,if sensor is faulty,sensor will cost crazy money and be careful with their wiring,their pins are poor quality and they can be easy damaged and if you short the cable,you can easy kill controller,due this I'm no going again with DeFi,they're holding value,but if they go wrong,they will cost you money to replace
If budget doesn't allow DeFi then I would have look on Shadow Gauges,they're great gauges for money or you can have look on M7 Racing Meter SMD,I've now at EP3
http://www.m7japan.com/m7-product-el...t-intelli.html
Hope this helps
Thanks,Jura
Thread
Thread Starter
Forum
Replies
Last Post








