M19KEU

I've recently purchased a 1996 classic wagon, WRX STi

When I press the appropriate switch the O/S mirrors folds in but not the N/S.

Is this by design (i.e. you're meant to pull in on the left to park) or do I simply have one mirror that doesn't work? Lol

Ta,

Mike

alcazar

iTrader: (2)

Probably not working.

I put folding mirrors on my UK car, which didn't have them, (Thanks Subaru/FHI) and they both fold.

M19KEU

Hmmm.... :\

Thanks for the insight

alcazar

iTrader: (2)

Remove both, plug the non working one into the working side.

If it now goes, it's the wiring. If it doesn't, it's the mirror itself.

M19KEU

Nice one

jaygsi

iTrader: (46)

Or take drivers side off and connect to a 12v car battery or power supply test it on there, done it loads of times

alcazar

iTrader: (2)

That assumes you know which wires to connect live and earth to?

IIRC, there were six wires, each PAIR needed a + and a - and the mirror would then either dip, go up, or fold. Reversing - for + etc made it go the other way.

But the fold pair would do NOTHING if + and - were applied such as to open WHEN IT WAS ALREADY OPEN.

So you need to know which is the fold pair and apply + -, then - +.