01 bugeye misfire on boost
#1
Scooby Newbie
Thread Starter
Join Date: Jan 2014
Location: London
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
01 bugeye misfire on boost
I'm hoping to find some help here with my on going problem. Only had the car for a few months and this problem has always been there, I have so far done the following.
New maf
Cleaned boost solenoid
New plugs (ngks)
Removed dump valve for standard
Smoke tested through induction pipe
Had anyone got an idea of what could be causing this misfire? Anybody had a similar issue that doesn't have anything to do with what I have changed/checked already?
Thanks
New maf
Cleaned boost solenoid
New plugs (ngks)
Removed dump valve for standard
Smoke tested through induction pipe
Had anyone got an idea of what could be causing this misfire? Anybody had a similar issue that doesn't have anything to do with what I have changed/checked already?
Thanks
Trending Topics
#8
Scooby Newbie
Thread Starter
Join Date: Jan 2014
Location: London
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
ive just checked my reciepts i had for the car, the plugs were changed just before i brought the car... guess what, there not ngks as i was told.... bosch super plus FR6KPP.... anyone ever had these fitted/
car is prodrive "mapped" aswell i forgot to add.
car is prodrive "mapped" aswell i forgot to add.
#9
Scooby Regular
Join Date: Apr 2012
Location: Sunderland
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
mine was an air leak on the inlet pipe, hard to see but the joint was cracked, once that was fixed it was fine then a different hesitation occured, that was a coil pack that needed replacing
Thread
Thread Starter
Forum
Replies
Last Post