jura11

iTrader: (7)

Hi guys

Time has come and wagon will be broken for parts couple of days

Please note:

All parts are without the postage,if you will pay via Payapal,you will need to accept charges or add extra 5%,collection will and is possible,wagon will be broken in couple of days


Engine with heads £7000 ONO


Engine has been built by Neil@Slowboy Racing
EJ22T Stroke'd to 2.35L painted black
RCM Wiseco Pistons
Carrillo Pro A Beam Rods
ACL Race Bearing sets:big end and main bearing set
KillerB baffled sump plate/windage tray
Twinscroll Sump
OEM 11mm Oil pump and water pump
14mm Headstuds
Cosworth Stopper HG
79mm Subaru V8(EJ257) Nitrided Crankshaft
Gates Kevlar timing belt kit
OEM Subaru gasket set been used
Oil: Millers Nanodrive 10-60

Heads:

JDM Spec C Big port heads(S204)
CDF Vernier Pulleys(Exhaust side)
Kelford V2-199-C
Kelford KVS109-STI springs
Supertech SIVN-1010 36.00mm(Std Size)
Supertech SEVN-1010 32.00mm(Std Size)
Painted black


Engine Dress Up:

Powder coated Header tank £40
Cobb Billet Oil Cap £25
Lightweight pulley set £70


Oil system:


KillerB Baffled sump plate(will be sold wit engine)
Twin scroll Sump (will be sold wit engine)


Fuel system:

Fuel Lab FPR and Fuel Lab Billet Fuel Filter £120(FPR),£60(Billet filter)
Modified WRX CDF Parallel Fuel Rails for Spec C manifold £80
Braided Fuel lines with AN fittings £300



Induction/Turbo:


ScoobyClinic GT30 .63AR Billet £1000 including oil feed and oil restrictor
Tial 44mm External Wastegate £200
RCM 260mm Tall Filter £100(including silicone hose and trumpet)
RCM 100mm Spun Aluminium Induction Trumpet
3port Porsche boost solenoid £40
Delco 3 bar Map sensor £80
NOS Sniper wet system(80HP jet) with 10lb NOS bottle and connected/controlled by Syvecs or any ECU which can allow or can control PWM £300
AEM Water Methanol kit(switcheable via Switch) £300
Hybrid(HDI) FMIC with Heat wrapped pipework £200



ECU:

Syvecs S6 PnP ECU with 8 switchable maps ALS and LC enabled with NTK L2H2 (LZA-09-E1) Wideband £1200 with wideband

Transmission:

5speed PPG(1st-4th straight cut,steel selector forks,5th std) £1500
Front and rear UK Differential 3.90
Exedy Twin Plate with Exedy lightweight flywheel £700

For both £2000 plus postage


Suspension mods:


Eibach ARB FR 22mm & RR 24mm £200
Whiteline Anti Lift Kit £100
Cusco Front and Rear Strut brace £100
STI Alloy Control Arms £50

Brakes:

FR K-sport 8pots 356mm with Performance Friction Z-Rated pads £700
RR K-Sport 6pots 330mm with Ferodo DS2500 £500
£1000 for both
Performance Friction RH665 brake fluid
HEL braided lines


Wheels:

XXR 530 8.75X18" ET20 £1000 for both
Yokohama Advan AD08 245/40 R18 W tyres done less than 300 miles in total,no track or drag racing


Interior:

Full late V8 dashboard(fully flocked ) £200 with Late V8 HVAC £350
AutoMeter NOS gauge fitted £30(supplied with NOS)
STi door cards £50
Sparco gearknob £40
Momo Drift steering wheel 330mm (prov sold)
Life-Line Mechanical 2.25Kg Extinguisher Kit £100


Exterior mods:

Chargespeed Front bumper with Chargespeed Carbon Ducts £300
STi fenders £50
JDL rear lip with rear bumper £150
Chargespeed Sideskirts £100
OE Bonnet with STi scoop £150
JDM Grill £80
Hella Supertone Horns £30


If you have more questions please let us know,I'm happy to answer to yours questions

Thanks,Jura

All parts which has been removed has been sold and paid in full

M2RTXhawkeye

iTrader: (61)

I'll take the steering wheel as per pm if the horn etc will be working. Will this be a direct fit to my bug Jura?

Cheers
Martin

A.S.B Breakers

iTrader: (14)

PMd regarding injectors, rad, pump and alternator

johnnybon

iTrader: (70)

Hi Jura here's a list of parts I would like to buy if I take them all how much

Works Bell Paddle shifter £200
Works Bell Boss Kit £80
HSD HR Coilovers FR 8kg/mm and 6kg/mm £400
XXR 530 8.75X18" ET20 £1000
Yokohama Advan AD08 245/40 R18 W
ATi ePod Steering Column Gauge pod with Shadow Boost Gauge and AutoMeter Fuel Level Gauge £130

Griflt

iTrader: (11)

Hi Jura

Will take
- Fuel Swirl/surge pot fitted in boot with Sytec Fuel filter and 044 fuel pump including the teflon fuel lines and AN fittings £300
- bonnet Sti scoop if avalable.
- Tein Bonnet dampers £70
- Front Solid CDF Droplinks £40

Cheers.

jura11

iTrader: (7)

OK there

Please PM me

Thanks,Jura

jura11

iTrader: (7)

All PM's replied or I hope

Jura

Infected by sti

iTrader: (6)

If the roof flap does not sell Jura, i would be interested

jura11

iTrader: (7)

Will keep you updated there and let you know soonest as I can


Jura

Dai P

iTrader: (3)

I'll take the KillerB baffled sump plate if you split the engine.

scoobynshag

iTrader: (14)

Do you have the classic front struts as I need 2 of them, no springs required

Cheers

A.S.B Breakers

iTrader: (14)

Ill take alternator, alloy rad and HRC pump Jura, thanks

oiler

iTrader: (1)

Hi Jura where would it be for collection.
May be interested in the engine is the sump and baffle plate staying with it as you have listed them separately as well?.
Thanks

vc_1985

iTrader: (10)

Pics of front bumper rear and skirts please. Wings avaliable?

Hammer man

iTrader: (25)

What size/how many rows, is the oil cooler? and where are you located?, cheers...

jura11

iTrader: (7)

Sump and KillerB baffled plate will stay for now on engine,until engine is not sold,hope this helps

Jura

Sorry,no classic struts there


Jura

OK I will add them as prov.sold and will PM you details

Jura

jura11

iTrader: (7)

Hi there

Engine should be ready for pick up next or week after,car will be breaking our friend,will PM you more details if you are interested

Sump and baffle plate will stay with engine and will go with engine(will be sold with the engine)

Jura

Pictures are here there

https://www.scoobynet.com/subaru-444...18-000ono.html

Yes wings are available

Jura

Hi there

Its Setrab Oil cooler and think have 19rows,its located where are our horns

Oil cooler fitted for us Ryan@prodriverules

Jura

chet123

iTrader: (7)

Hi Jura,

Hdi fmic - does that include all the pipe work to fit newage sti

3" evolution does that include the down pipe by chance.

jura11

iTrader: (7)

Hi Chet

FMIC has been made for Rotated kit,but will needs to be slightly modified for standard position turbo

Exhaust is without the downpipe,we are running Rotated kit and rotated downpipe

Thanks,Jura

Dai P

iTrader: (3)

Would you sell the rear Cusco strut brace separately? Any pictures of it?

trevsjwood

iTrader: (2)

I will have the oil cooler Jura, you have pm
thanks
Trev

kevfawcett

iTrader: (7)

Interested in the steering wheel and boss kit if the sale falls through

Any pics of the seats?

**jay**

iTrader: (1)

Is the toucan and sensor pack sold?

jura11

iTrader: (7)

Steering wheel and boss kit are prov.sold

Pictures of the seats,they're here

https://www.scoobynet.com/subaru-444...18-000ono.html

Seats are like new,no rips,no burns etc

Jura

Yes there,Toucan and sensor pack has been sold

Jura

**jay**

iTrader: (1)

no probs cheers anyway
Jay

M2RTXhawkeye

iTrader: (61)

Hey Jura any luck on that kit for the steering wheel buddy?

Cheers
Martin

jura11

iTrader: (7)

Hi Martin

I only found D1 Spec snap off kit and other boss kit probably we are sold,not sure,still I must speak with my brother

Thanks,Jura

M2RTXhawkeye

iTrader: (61)

Thankyou Jura, defo want it if that snap off one will work together that'd be great. I'll catch up with you tomorrow the see what we come up with

Martin

johnnybon

iTrader: (70)

Hi mate stick the STI peddles to my list

Also if Jura doesn't come up with a snap on boss I have a couple

macs sti

Whiteline roll centre kit sold? If sale falls through i will take it