Maybe Breaking forged V3 WRX
#1
Maybe Breaking forged V3 WRX
Hi All
I recently fully rebuild my V3 WRX open deck engine with forged internals and brand new cross drilled crankshaft and high pressure oil pump but after spending around £2k only 1500 miles its knocking again and I can only assume that either the oil pump has failed or its due to me being stupid+tight towards the end of the build and using a used modine(from another really good engine)
Anyway I am not too keen on pulling the engine out again and I dont think I will get much for the car whole so I thought I would see what interest I have in the parts.
The car is still whole at the moment and I dont want to start stripping until I have a deposit on a decent amount of the parts so if anyone wants something just let me know and we can go from there.
The car is 406 Silver and all panels are in good condition.
The engine parts, flywheel and clutch have only covered 1500 miles
I am open to SENSIBLE offers on all of the parts.
Here we go:
Open deck blocks bored to 92.5mm and skimmed faces(1500 miles) £225
Gearbox (9R-TY752VBCAA) £160
Rear diff £75
VF22 Turbo(boosted well and no smoke) £250
Eagle forged rods £180
CP forged pistons(92.5mm) £200
Sump(good condition) £30
Toyosports FMIC, hard pipes+silicone joiners £150
Inlet manifold complete with 440cc injectors £150
Blitz NUR spec-R catback £ 175
3" all the way bellmouth de-cat(H+S) £90
2.5" straight through c-back exhaust with 4" tailpipe(unknown make) £100
HKS de-cat pipe(converted to bell mouth) £60
Unequal length tubular headers £150
Cylinderheads £75 each
Oil cooler kit with braided hoses and fittings £120
Fidanza aluminium flywheel £150
Helix 4 paddle ceramic clutch kit £200
ARP head stud kit £120
Aluminium under
STI-9 conrods £80
Cusco front+rear strut braces £60 each
Cusco rear anti-roll bar £75
Standard shocks with lowering springs £125 for the set
STI 16" alloys in gloss black with legal tyres £125
4-pot calipers and good discs £150
Standard rear calipers with useable discs £75
STI rear light with clear indicators £75
Nardi steering wheel+gearknob £50
Black+grey interior(good condition) £150
Complete shell with doors, boot, bonnet and glass £400
Metal watertank £45
Radiator £40
Samco yellow rad hoses £25
Everthing else is/may be available but would take too long to list so just get in touch if you want anything else.
I am looking for £1800 for the car as a whole which I feel is fair as the car is in very good condition. I would rather it went in one piece as
Cheers Rich
I recently fully rebuild my V3 WRX open deck engine with forged internals and brand new cross drilled crankshaft and high pressure oil pump but after spending around £2k only 1500 miles its knocking again and I can only assume that either the oil pump has failed or its due to me being stupid+tight towards the end of the build and using a used modine(from another really good engine)
Anyway I am not too keen on pulling the engine out again and I dont think I will get much for the car whole so I thought I would see what interest I have in the parts.
The car is still whole at the moment and I dont want to start stripping until I have a deposit on a decent amount of the parts so if anyone wants something just let me know and we can go from there.
The car is 406 Silver and all panels are in good condition.
The engine parts, flywheel and clutch have only covered 1500 miles
I am open to SENSIBLE offers on all of the parts.
Here we go:
Open deck blocks bored to 92.5mm and skimmed faces(1500 miles) £225
Gearbox (9R-TY752VBCAA) £160
Rear diff £75
VF22 Turbo(boosted well and no smoke) £250
Eagle forged rods £180
CP forged pistons(92.5mm) £200
Sump(good condition) £30
Toyosports FMIC, hard pipes+silicone joiners £150
Inlet manifold complete with 440cc injectors £150
Blitz NUR spec-R catback £ 175
3" all the way bellmouth de-cat(H+S) £90
2.5" straight through c-back exhaust with 4" tailpipe(unknown make) £100
HKS de-cat pipe(converted to bell mouth) £60
Unequal length tubular headers £150
Cylinderheads £75 each
Oil cooler kit with braided hoses and fittings £120
Fidanza aluminium flywheel £150
Helix 4 paddle ceramic clutch kit £200
ARP head stud kit £120
Aluminium under
STI-9 conrods £80
Cusco front+rear strut braces £60 each
Cusco rear anti-roll bar £75
Standard shocks with lowering springs £125 for the set
STI 16" alloys in gloss black with legal tyres £125
4-pot calipers and good discs £150
Standard rear calipers with useable discs £75
STI rear light with clear indicators £75
Nardi steering wheel+gearknob £50
Black+grey interior(good condition) £150
Complete shell with doors, boot, bonnet and glass £400
Metal watertank £45
Radiator £40
Samco yellow rad hoses £25
Everthing else is/may be available but would take too long to list so just get in touch if you want anything else.
I am looking for £1800 for the car as a whole which I feel is fair as the car is in very good condition. I would rather it went in one piece as
Cheers Rich
#3
Hi
Radiator is a standard item.
The oil cooler is made by Setrab and it comes with stainless braided hoses, anodised red/blue fittings and sandwich plate. It locates on the passenger side behind the bumper.
Rich
Radiator is a standard item.
The oil cooler is made by Setrab and it comes with stainless braided hoses, anodised red/blue fittings and sandwich plate. It locates on the passenger side behind the bumper.
Rich
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM