Version 1 WRX type RA breaking (Newcastle upon Tyne)
#1
Scooby Newbie
Thread Starter
Join Date: Oct 2012
Location: Northumberland
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Version 1 WRX type RA breaking (Newcastle upon Tyne)
Hi, I'm breaking my 94 version 1 WRX type RA most of the car is now in bits and parts ready to be sold.
All prices can be negotiated with postage etc the bigger things will need collected I just don't have the time to get pallets etc.
Due to my job and being very busy please try and TXT OR RING me for parts PM's may take time for me to reply to also replies to this thread may take time so please ring or txt me on 07903382236.
Please don't give me stupid offers for parts these will just be ignored.
All the smaller parts can be posted but please bare with me as I work 12 hour shifts and have to find time to find packaging and sort the parcel collection etc but it will get to you and I'll keep you informed what's happening.
PayPal accepted I'd prefer as a gift due to the fees unless or bank transfere or I'd much rather cash on collection from Newcastle upon Tyne.
Ok my track prepped WRX RA (non roof vent) most parts are less than a year old -
PARTS AND PRICES-
Alkatec ECU bought and mapped from Andy Forrest in 2013 and was brand new with antilag enabled. 4 plug connector with Andy Forrest invoice from sale £deposit taken
Spax fully adjustable coilovers in box new in 2013 from demon tweeks £550
Compomotive MO6's 18" with decent toyo T1R tyres finished in anthracite £600
Carbon fibre charge speed boot lid in excellent condition with 3 holes either side for any genuine Subaru spoiler £SOLD
Fuel system to stop fuel starvation on hard cornering brand new in tank Walboro 255lph pump 1.5 litre alloy swirl pot external Bosch 044 pump all connected with stainless braided hose with wiring, relay and switch excellent set up £110
Cusco master cylinder brace £SOLD
Prodrive RB5 rear spoiler in white very rare £SOLD
Alloy bonnet with pins and STI vent £50
Front strut brace £40
RA 5th injector inlet manilfold £70
TD05 STI turbo no play no smoke boosted perfect £150
550cc injectors with adaptor kit for V1/2 £sold
Cusco safety 21 6 point bolt in roll cage dash dodger £350
Front RA seats no wear £40
Front bumper STI fog covers JUN style splitter cut out for FMIC £sold
Charge speed fibreglass front wings £SOLD
FMIC full kit £SOLD
Samco blue water hose kit £60
Forge adjustable blow of valve (dump valve) £60
Braided brake hoses £30
Subaru 4 pot front calipers with new brembo pads and tarox 88 groove discs £100
Alloy sump gaurd £50
Alloy petrol tank gaurd £40
Genuine type RA non DCCD close ratio/short ratio gearbox perfect order £350
Rear diff LSD £70
4 drive shafts £50
Alloy STI bottom arms £40
Coilpacks x4 £60
MAF sensor £40
Exedy stage 1 clutch £sold
Rear non STI lights £20
Pre facelift headlights £20
Facelift crystal headlights £20
Clear sidelights £15
Clear indicators £10
Facelift open front grill WRC style with pink STI stars badge £30
Full shell genuine WRX type RA with boot doors dash rear bumper glass 11 months MOT very very clean small hole in passenger sill nothing major very clean and 100% solid underneath £300
ANYTHING ELSE PLEASE JUST ASK.
RING TXT ME ON 07903382236
Cheers,Steve.
All prices can be negotiated with postage etc the bigger things will need collected I just don't have the time to get pallets etc.
Due to my job and being very busy please try and TXT OR RING me for parts PM's may take time for me to reply to also replies to this thread may take time so please ring or txt me on 07903382236.
Please don't give me stupid offers for parts these will just be ignored.
All the smaller parts can be posted but please bare with me as I work 12 hour shifts and have to find time to find packaging and sort the parcel collection etc but it will get to you and I'll keep you informed what's happening.
PayPal accepted I'd prefer as a gift due to the fees unless or bank transfere or I'd much rather cash on collection from Newcastle upon Tyne.
Ok my track prepped WRX RA (non roof vent) most parts are less than a year old -
PARTS AND PRICES-
Alkatec ECU bought and mapped from Andy Forrest in 2013 and was brand new with antilag enabled. 4 plug connector with Andy Forrest invoice from sale £deposit taken
Spax fully adjustable coilovers in box new in 2013 from demon tweeks £550
Compomotive MO6's 18" with decent toyo T1R tyres finished in anthracite £600
Carbon fibre charge speed boot lid in excellent condition with 3 holes either side for any genuine Subaru spoiler £SOLD
Fuel system to stop fuel starvation on hard cornering brand new in tank Walboro 255lph pump 1.5 litre alloy swirl pot external Bosch 044 pump all connected with stainless braided hose with wiring, relay and switch excellent set up £110
Cusco master cylinder brace £SOLD
Prodrive RB5 rear spoiler in white very rare £SOLD
Alloy bonnet with pins and STI vent £50
Front strut brace £40
RA 5th injector inlet manilfold £70
TD05 STI turbo no play no smoke boosted perfect £150
550cc injectors with adaptor kit for V1/2 £sold
Cusco safety 21 6 point bolt in roll cage dash dodger £350
Front RA seats no wear £40
Front bumper STI fog covers JUN style splitter cut out for FMIC £sold
Charge speed fibreglass front wings £SOLD
FMIC full kit £SOLD
Samco blue water hose kit £60
Forge adjustable blow of valve (dump valve) £60
Braided brake hoses £30
Subaru 4 pot front calipers with new brembo pads and tarox 88 groove discs £100
Alloy sump gaurd £50
Alloy petrol tank gaurd £40
Genuine type RA non DCCD close ratio/short ratio gearbox perfect order £350
Rear diff LSD £70
4 drive shafts £50
Alloy STI bottom arms £40
Coilpacks x4 £60
MAF sensor £40
Exedy stage 1 clutch £sold
Rear non STI lights £20
Pre facelift headlights £20
Facelift crystal headlights £20
Clear sidelights £15
Clear indicators £10
Facelift open front grill WRC style with pink STI stars badge £30
Full shell genuine WRX type RA with boot doors dash rear bumper glass 11 months MOT very very clean small hole in passenger sill nothing major very clean and 100% solid underneath £300
ANYTHING ELSE PLEASE JUST ASK.
RING TXT ME ON 07903382236
Cheers,Steve.
Last edited by steveturbo; 11 September 2014 at 08:57 AM. Reason: .
#2
Scooby Regular
Join Date: Mar 2014
Location: Hillingdon
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
How much for the bonnet scoop . My car is a L reg 1994 . Would it fit .
Would love to take your ECU but a few £100 short .
Your jets what's the lowest you would take . I got the 440s but need bigger . Yours are 550 is that right.
Would love to take your ECU but a few £100 short .
Your jets what's the lowest you would take . I got the 440s but need bigger . Yours are 550 is that right.
#4
Scooby Newbie
Thread Starter
Join Date: Oct 2012
Location: Northumberland
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Bonnet scoop is practically welded to the bonnet with tiger seal etc I tried removing it when I put the bonnet on but gave up so unfortunately it'll have to go with the bonnet plus you have drill more holes for it to fit prob better off sticking with the original tbh
Yes the injectors are 550cc I can do them for 180 posted if that's any good?
Yes the injectors are 550cc I can do them for 180 posted if that's any good?
Trending Topics
#15
Scooby Regular
Join Date: Jun 2014
Location: oswaldtwistle,accrington
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
rear bumper
Hi mate intrested in rear bumper how much delivered to lancs thanks also how much for all four doors aswell dont need door cards glass or mechs as have them already if u want to keep thanks mark
#16
Scooby Newbie
Thread Starter
Join Date: Oct 2012
Location: Northumberland
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Hi mate the back bumper is sold and gone now all four doors are still available but would have to be collection only as I just don't have the time or space to sort them for postage.
#23
Scooby Regular
iTrader: (2)
Join Date: Mar 2010
Location: Poole, Dorset
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Hi
Do you still have the turbo inlet pipe, the one goes between the resonator and the turbo and also connects to the dumpvalve?
If you so still have it and it's spit free and not degraded how much for it posted to Poole, Dorset
Thanks very much
Jonny
Do you still have the turbo inlet pipe, the one goes between the resonator and the turbo and also connects to the dumpvalve?
If you so still have it and it's spit free and not degraded how much for it posted to Poole, Dorset
Thanks very much
Jonny
#24
Scooby Regular
iTrader: (2)
Join Date: Mar 2010
Location: Poole, Dorset
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Hi
managed to find the turbo inlet pipe elsewhere but still after the pipe that goes from the resonator box to the IACV. There is a picture on this thread with the pipe circled.
https://www.scoobynet.com/general-te...ent-hoses.html
If you;ve got one in good condition how much posted to Poole, Dorset
Thanks, Jonny
managed to find the turbo inlet pipe elsewhere but still after the pipe that goes from the resonator box to the IACV. There is a picture on this thread with the pipe circled.
https://www.scoobynet.com/general-te...ent-hoses.html
If you;ve got one in good condition how much posted to Poole, Dorset
Thanks, Jonny
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM