Revs are holding or spiking a little when changing gears after remap on Blob Sti type
27 August 2013, 08:07 PM
#1
Scooby Regular
Thread Starter
Join Date: Mar 2013
Location: Slough
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Revs are holding or spiking a little when changing gears after remap on Blob Sti type
Had my remap a few days. The car was a standard blob Sti type UK.
Before the remap, it had a ninja back box with the prodrive sports cat and decat pipe. Spark plugs were changed to pfr7b NGK, cosworth panel filter, and millers 10w/50 oil.
I requested a safe map hence only 320bhp with 20 psi on shell v power.
I have noticed sometimes that when dipping the clutch to change gear, the revs are held for a brief second or go very slightly higher before going to idle. Its a bit like what they did on the mark 1 focus for emissions.
I am waiting for Rich from Fb tuning to return from holiday but was wondering if anyone else has had this?
Regards.
Before the remap, it had a ninja back box with the prodrive sports cat and decat pipe. Spark plugs were changed to pfr7b NGK, cosworth panel filter, and millers 10w/50 oil.
I requested a safe map hence only 320bhp with 20 psi on shell v power.
I have noticed sometimes that when dipping the clutch to change gear, the revs are held for a brief second or go very slightly higher before going to idle. Its a bit like what they did on the mark 1 focus for emissions.
I am waiting for Rich from Fb tuning to return from holiday but was wondering if anyone else has had this?
Regards.
Thread
Thread Starter
Forum
Replies
Last Post