Mapping questions
#1
Scooby Regular
Thread Starter
Mapping questions
Hi All,
I'm currently gathering parts together to upgrade my 2003 WRX PPP. So far I have a TD05 16G, STi Pinks, 255 Walbro Pump and a 3 Port. I just need to get an STi Up pipe and some new plugs. I'm aiming for around 320 Bhp.
I'm assuming I can fit the Turbo, up pipe, injectors and Pump before hand. But i've heard that its best to let the mapper fit the 3 port and the plugs as they need to be gapped?
Also the car has a PPP ECU, is it best to map that or replace it with a stock ECU? Does the PPP ECU already have the Ecutek licence on it?
And finally are there any mappers in the north Hampshire area? I'm based in Hook.
Thanks!
Scott
I'm currently gathering parts together to upgrade my 2003 WRX PPP. So far I have a TD05 16G, STi Pinks, 255 Walbro Pump and a 3 Port. I just need to get an STi Up pipe and some new plugs. I'm aiming for around 320 Bhp.
I'm assuming I can fit the Turbo, up pipe, injectors and Pump before hand. But i've heard that its best to let the mapper fit the 3 port and the plugs as they need to be gapped?
Also the car has a PPP ECU, is it best to map that or replace it with a stock ECU? Does the PPP ECU already have the Ecutek licence on it?
And finally are there any mappers in the north Hampshire area? I'm based in Hook.
Thanks!
Scott
#4
Scooby Regular
Join Date: May 2013
Location: East Grinstead
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
#7
Scooby Regular
iTrader: (2)
Join Date: Oct 2012
Location: UK
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
Nice setup, I used to have a Andy Forrest TD05 16G and got 330bhp with supporting mods.
I have a STi TMIC for sale if you are interested, be a a lot better than the std one!
Duncan will be mapping my car once all my new parts are fitted. Gone for a VF34 this time!
Don't forget the handling and Brakes!!!! ;-)
I have a STi TMIC for sale if you are interested, be a a lot better than the std one!
Duncan will be mapping my car once all my new parts are fitted. Gone for a VF34 this time!
Don't forget the handling and Brakes!!!! ;-)
Trending Topics
#8
Former Sponsor
iTrader: (3)
Scotty - I am based in hampshire dorset border in Bournemouth but travel all over the uk.
Plugs need to be gapped to around 0.7mm and fitted pre mapping session. The 3 port can be fitted beforehand so long as you keep it off boost but you would want to do that with the other mods too anyway If you cant fit the 3 port then not a problem for the chosen mapper to do it (hopefully me )
Anyway my contact details are below. I am away racing this weekend up at snetterton time attack but have time next week for a very local map
Plugs need to be gapped to around 0.7mm and fitted pre mapping session. The 3 port can be fitted beforehand so long as you keep it off boost but you would want to do that with the other mods too anyway If you cant fit the 3 port then not a problem for the chosen mapper to do it (hopefully me )
Anyway my contact details are below. I am away racing this weekend up at snetterton time attack but have time next week for a very local map
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM