Rebuild or new block etc
#1
Scooby Regular
Thread Starter
Join Date: Apr 2013
Location: derby
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Rebuild or new block etc
Hi folks
think after my upgraded and remapping my head gasket has gone.
it slightly starts to over heat a quarter below the red temp line on the gauge then drops down again.
the radiator pipes are hot n the top one bit cold on the bottom one and coolant is managing to leak out near the bottom pipe I think.
Engine has been apart recently I don’t know what for and the person I brought off doesn’t know either.
blob 2.0 wrx upgraded just to sti spec making 280 max hp.
can anyone point me in the right direction and possibility of what best route is regarding 2nd hand engine, just getting gasket done etc, never had to deal with this before ive been dealing with area 52 auto sports at the minute
think after my upgraded and remapping my head gasket has gone.
it slightly starts to over heat a quarter below the red temp line on the gauge then drops down again.
the radiator pipes are hot n the top one bit cold on the bottom one and coolant is managing to leak out near the bottom pipe I think.
Engine has been apart recently I don’t know what for and the person I brought off doesn’t know either.
blob 2.0 wrx upgraded just to sti spec making 280 max hp.
can anyone point me in the right direction and possibility of what best route is regarding 2nd hand engine, just getting gasket done etc, never had to deal with this before ive been dealing with area 52 auto sports at the minute
#2
Scooby Regular
Think I just posted on your other thread. You need to bleed your system.
Thread
Thread Starter
Forum
Replies
Last Post
njstewart
General Technical
2
30 November 2012 03:36 PM