Gearbox advice - HELP!!!!
#1
Scooby Regular
Thread Starter
Join Date: Jan 2008
Location: Lincolnshire
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Gearbox advice - HELP!!!!
I have just bought a secondhand gearbox to fit to a car that was advertised as a TY754VB1BA with a 4.44 final drive, when it was delivered i took the oil bung out and counted the teeth on the crownwheel and there were 37. I am sure there should be 40 teeth on a 4.44 and that 37 teeth makes it a 4.111 hence the box i've been supplied is incorrect.
The supplier says its my mistake am I going insane or have I been supplied with the wrong box????? HELP!!!!
thanks.
The supplier says its my mistake am I going insane or have I been supplied with the wrong box????? HELP!!!!
thanks.
#2
Scooby Regular
are you Marcus off the Rally forum???
drop me a PM with your g/box code (TY number above the starter motor hole) and i'll check it for you............
alyn
drop me a PM with your g/box code (TY number above the starter motor hole) and i'll check it for you............
alyn
#3
Scooby Regular
Thread Starter
Join Date: Jan 2008
Location: Lincolnshire
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Hi Alyn
yep one and the same as the rally forum version!!!
I only wanted this box while I wait for bits for my dog box, the 'temporary' box was supposed to be a TY754VB1BA and should have a 4.44 final drive according to all the transmission charts but it only has a 37 tooth crownwheel and that makes it a 4.11 by my calculation.
The supplier has now agreed to take the box back and refund me but now im stuck without a box again and i'm supposed to be out testing in 10 days
yep one and the same as the rally forum version!!!
I only wanted this box while I wait for bits for my dog box, the 'temporary' box was supposed to be a TY754VB1BA and should have a 4.44 final drive according to all the transmission charts but it only has a 37 tooth crownwheel and that makes it a 4.11 by my calculation.
The supplier has now agreed to take the box back and refund me but now im stuck without a box again and i'm supposed to be out testing in 10 days
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM