Mechanical or Electrical Gauges?
14 February 2002, 06:54 PM
#1
Scooby Regular
Thread Starter
Join Date: Mar 1999
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
Quite simply which will be most accurate? I'm going for a boost, oil temp and oil pressure in a centre pod.
Would also appreciate some recommendations on a good match to the standard MY00 dials, 'Phantom' seem to look okay but are there any others worth looking at?
Many thanks,
Otis.
Would also appreciate some recommendations on a good match to the standard MY00 dials, 'Phantom' seem to look okay but are there any others worth looking at?
Many thanks,
Otis.
14 February 2002, 08:06 PM
#2
Scooby Regular
Join Date: Dec 2001
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Autometer gauges are pretty good/accurate, however always assume for safety that the boost gauges under-read by about 1psi.
They come in white faces with green back lighting to match the original Subaru gauges. 52mm or 2 1/16" (which are the same size) as well as 60mm are available
As usual buying them in the USA is way cheaper than the UK.
I paid US$60.00 for each of their Air/Fuel and boost gauges.
They come in white faces with green back lighting to match the original Subaru gauges. 52mm or 2 1/16" (which are the same size) as well as 60mm are available
As usual buying them in the USA is way cheaper than the UK.
I paid US$60.00 for each of their Air/Fuel and boost gauges.
Thread
Thread Starter
Forum
Replies
Last Post