scoobyhep

Hi guys
I changed from 4th to 5th and a huge crunch happened, then there was no longer a 5th gear. The gears were fine before.

The other gears seem ok although a little stiff now and again, but there is no drive at all in 5th, it pops in ok but nothing at all just engine rev and a clunking noise.

Does this mean new gearbox or linkage arm???

Thanks
Ian

T5OLF

iTrader: (4)

Sounds like you have done 5th gear, what year is the car? the early ones had a smaller woodruff key on 5th which tends to break and then damages the two 5th gear kogs.

scoobyhep

Its a 1994 WRX RA.

Is it easier just to fit a new gearbox rather than stripping it down?

Which ones will fit my model?

Thanks

scoobyhep

Anyone please

flatoutscooby

I have an sti type r gearbox with dccd and all the bits needed to convert your car, pm if you're interested.

P1 NUT

iTrader: (1)

Sounds like you have sheared the teeth off the 5th gear cog, i did same to my box only it was 3rd gear it happened to.

scoobyhep

It sounds like the same thing.

Did you just replace the whole box?

scoobyhep

Pm'd

P1 NUT

iTrader: (1)

No scoobyhep, just got internals replaced

Danny Boy

iTrader: (2)

Can you still get reverse?

Danny Boy

iTrader: (2)

Reason i ask is becasue 5th and reverse are on the same selector fork, if reverse has gone too its likely to have just sheared a fork or selector rod which would be alot less costly to replace.

T5OLF

iTrader: (4)

Same box as mine, there is a good chance you have broke the key on 5th gear- they were smaller on the early box's. This then damages the two 5th gears. New they are around 260 quid for both gears plus the cost of the rebuild. I pulled the box out myself bought two used gears and then had the box rebuilt using only what was needed, ie not full rebuild. It cost me 60 quid for the gears and 125 for fitting them along with 3 new sycnros plus 35 for the oil.

If your going to fit a used box(if you can find an RA box with the correct code that is) you want some kind of warranty or you may as well rebuild what you have. Were are you based?

dragonspiritdesign

whurring noise accelerating to 30 and deaclerating right through car, more at the back then the front!happens when driving in both a straight line and round a corner.help please.

scoobyhep

A town called March, not to far from Zen performance (well 50-60miles).
I am quite worried about buying a new box and it not being any good, but then was thinking of maybe getting a stronger STi box or something????? Or maybe getting it rebuilt ???

I really don't know what to do. Just had a full engine re-build then this happens

scoobyhep

Still got reverse mate, the other forward gears are also really stiff now.