Roger Clark Manifold and Venuture Up Pipe
#1
Scooby Regular
Thread Starter
Join Date: Jan 2007
Location: Buckinghamshire
Posts: 2,272
Likes: 0
Received 0 Likes
on
0 Posts
Roger Clark Manifold and Venuture Up Pipe
Hi,
Anyone used these parts before (Roger Clark Manifold and Venture Up Pipe). Am I right in thinking they fit a UK STi 9, also is the manifold unequal length (I want to keep the burble)?
Cheers,
Fz
Anyone used these parts before (Roger Clark Manifold and Venture Up Pipe). Am I right in thinking they fit a UK STi 9, also is the manifold unequal length (I want to keep the burble)?
Cheers,
Fz
#2
Scooby Regular
iTrader: (5)
Join Date: Feb 2003
Location: Worcester
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
I ve had a RCM manifold on mine for a while now - top quality as you expect with RCM, no worries with blown gaskets \ welds like on my pervious set
phone up Olly at RCM and he will give you the low down and what he can offer
phone up Olly at RCM and he will give you the low down and what he can offer
#3
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
best bet is ask Olly, what I can say is the set's i have seen come from RCMS are first class and fit perfectly.
David
David
#7
Former Sponsor
iTrader: (20)
Join Date: Oct 2006
Location: 8.95 @ 168mph. Zero to 1KM 194.1mph
Posts: 1,150
Likes: 0
Received 0 Likes
on
0 Posts
There is one company who manufactures the 3 bolt design manifold for companies such as GT Spec, Tomei, RCMS, Lateral, and a few others.
However, be very careful to make sure you are getting this manifold, which is extremely well made, as I have come across a cheap copy, which is very poor by comparison.
Mark.
However, be very careful to make sure you are getting this manifold, which is extremely well made, as I have come across a cheap copy, which is very poor by comparison.
Mark.
Trending Topics
#8
Subaru Tuning Specialist
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
An easy way to identify the quality version from the cheap replica is to look inside the collector. The GT spec have a cone shape between the individual primary pipes, the nasty replica ones just have a rough flat welded plate.
Andy
Andy
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM