Driveshafts ... Lots of play
#1
Scooby Regular
Thread Starter
Join Date: Nov 2003
Location: West Yorkshire
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Driveshafts ... Lots of play
After hearing a clicking kind of noise coming from the front drivers side wheel area on full lock on MY97 UK Turbo, i took off the wheel to investigate,
The inner part of the driveshaft (gearbox end) there is about 3/4 to 1" of movement, ....
Do i need to replace the whole driveshaft or just the joint ?
Is it worth using a second hand shaft complete with joint ?
Also, if thats ok, would a WRX part fit my car ....
Thanks in advance,
Any advice would be apprieciated ...
The inner part of the driveshaft (gearbox end) there is about 3/4 to 1" of movement, ....
Do i need to replace the whole driveshaft or just the joint ?
Is it worth using a second hand shaft complete with joint ?
Also, if thats ok, would a WRX part fit my car ....
Thanks in advance,
Any advice would be apprieciated ...
#2
Scooby Regular
Drive shaft is supposed to have about that much movement in and out of the CV. Sounds like hub CV may be worn.
WRX shafts are identical.
WRX shafts are identical.
Thread
Thread Starter
Forum
Replies
Last Post