STI Type RA V4 Turbo Upgrade Advice
#1
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: Kegworth
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
STI Type RA V4 Turbo Upgrade Advice
Hi All
Whilst out today, the VF24 Turbo on My V4 RA gave up the gost. The Bearing has gone and it makes a hell of a racket.
I Stripped it down and can confirm its dead.
Now, as to what do do next there are three optios as I see it:
1) replace as standard
2) replace with later version JDM turbo
3) go specialist/after market route including injectors and fule pump and remap.
The car has a new steel engine with 3.5 inch Decat and Power FC so am looking for option 3 but what do people think? What options are there if i'm chasing 350-400 HP?
Any advice would be useful on specs and suppliers.
Also if anybody can explain the IHI turbo range so if i end up with option 2, what i should look for.
Whilst out today, the VF24 Turbo on My V4 RA gave up the gost. The Bearing has gone and it makes a hell of a racket.
I Stripped it down and can confirm its dead.
Now, as to what do do next there are three optios as I see it:
1) replace as standard
2) replace with later version JDM turbo
3) go specialist/after market route including injectors and fule pump and remap.
The car has a new steel engine with 3.5 inch Decat and Power FC so am looking for option 3 but what do people think? What options are there if i'm chasing 350-400 HP?
Any advice would be useful on specs and suppliers.
Also if anybody can explain the IHI turbo range so if i end up with option 2, what i should look for.
Last edited by mikey f; 12 September 2004 at 09:25 PM. Reason: Cos RA has VF24 not VF34
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post