Whining Noise
#1
Scooby Regular
Thread Starter
Join Date: Feb 2004
Location: IPKIS now a member of the exclusive 200mph club
Posts: 13,974
Likes: 0
Received 0 Likes
on
0 Posts
Whining Noise
My 99Uk turbo has devloped a whine on the transmission somewhere in all gears.
I have no gear selection problems at all and car still drives ok
any ideas what it could be???
not taking it to the main dealer rip off merchants they have already kicked me in the nuts for over 4 grand as it is
please help as if i can't sort this i'm getting rid of the car
I have no gear selection problems at all and car still drives ok
any ideas what it could be???
not taking it to the main dealer rip off merchants they have already kicked me in the nuts for over 4 grand as it is
please help as if i can't sort this i'm getting rid of the car
#2
On my MY00 there was always some whine but it got fairly bad without being intusive though. You know it's there and it just niggles. Well the gearbox was remove and the crown & pinion/bearings were worn. Result was a new gearbox at £2700 plus another £700 to buy my old gearbox back as I thought I would have to go to court to get recompense. I had a Dutch import with 1 year's warranty and the gearbox was replaced on the 15th month! I did getpaid after 13 months which involved writing direct to Fuji Heavy Industries in Japan etc. However, the Dutch warranty crowd maintained that the bearings simply needed replacing. Either way it's expensive to diagnose and moreso to repair because of the labour.
Hope this helps.
Jerome
Hope this helps.
Jerome
#3
Scooby Regular
iTrader: (2)
Had mine done for £670 including parts and labour and an IDL Blueprint Clutch kit.
2 tappered roller bearing where shot.
This price was for 5 hours labour to get the box in/out, 4 hours labour to strip/rebuild, bearings/seals and clutch kit.
The noise was most noticable above 45mph in 4th/5th, but it was there in all gears but due to background noise was less noticable.
If your in the South drop me a PM an I'll point you towards my mechanic (£27.50 per hour labour rate)
2 tappered roller bearing where shot.
This price was for 5 hours labour to get the box in/out, 4 hours labour to strip/rebuild, bearings/seals and clutch kit.
The noise was most noticable above 45mph in 4th/5th, but it was there in all gears but due to background noise was less noticable.
If your in the South drop me a PM an I'll point you towards my mechanic (£27.50 per hour labour rate)
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM