Best/cheapest uppipe (MY02)
#1
Scooby Regular
Thread Starter
Join Date: May 2002
Location: Pompy
Posts: 586
Likes: 0
Received 0 Likes
on
0 Posts
Best/cheapest uppipe (MY02) +?
As title, not a lot in it but Magnex looks ok at £100, any other out there that I should consider or if anyone has one....
Daz.
I know the standard is referred to as a precat pipe but is there actually anything in it that restricts flow?
Daz.
I know the standard is referred to as a precat pipe but is there actually anything in it that restricts flow?
Last edited by Daz WRX; 17 June 2004 at 09:36 AM.
#3
Scooby Regular
Join Date: Apr 2002
Location: Hertfordshire
Posts: 882
Likes: 0
Received 0 Likes
on
0 Posts
...can't really compare 'em because I've only tried one.
But I was VERY impressed with quicker spool up time after fitting the scoobysport uppipe to my MY02 . (There may be some still knocking about second hand now scoobysport has closed)
cheers
Dave
But I was VERY impressed with quicker spool up time after fitting the scoobysport uppipe to my MY02 . (There may be some still knocking about second hand now scoobysport has closed)
cheers
Dave
#4
Daz / Dave
Thank you for the recommendation
For your information, the scoobysport exhaust system is still available following the relaunch of ScoobySport under new management.
Please see www.scoobysport.com for more information.
All the best
Simon
Thank you for the recommendation
For your information, the scoobysport exhaust system is still available following the relaunch of ScoobySport under new management.
Please see www.scoobysport.com for more information.
All the best
Simon
#5
Scooby Regular
Join Date: Jul 2000
Location: Dull White BMW
Posts: 5,052
Likes: 0
Received 0 Likes
on
0 Posts
I had the Scoobysport Janspeed up-pipe. It was expensive but a perfect fit and you don't want to have to go back to it!
Buy new gaskets with it too.
Steve
Buy new gaskets with it too.
Steve
#6
Scooby Regular
iTrader: (5)
Join Date: Feb 2003
Location: Worcester
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
when I was in this position I went for a something different to the norm - after my remap I did get around 25 lbs torque extra with equal length manifold - this comes with the up pipe
www.powerstation.org.uk
quote
In an effort to bring Impreza owners the very best in performance for your vehicle whilst keeping the costs down POWERSTATION are please to offer a fully polished stainless steel equal length header! Designed to fit ALL Impreza turbos (WRX/STi) these headers will give around 25lbs/ft of torque across the entire rev range. In 'driving' terms this offers a crisp throttle response, faster pickup, increased smoothness and overall driveability.
www.powerstation.org.uk
quote
In an effort to bring Impreza owners the very best in performance for your vehicle whilst keeping the costs down POWERSTATION are please to offer a fully polished stainless steel equal length header! Designed to fit ALL Impreza turbos (WRX/STi) these headers will give around 25lbs/ft of torque across the entire rev range. In 'driving' terms this offers a crisp throttle response, faster pickup, increased smoothness and overall driveability.
#7
We still make the orginal up pipe but with double slip joint in the middle , that allows it to move slighty with the heat expansion and takes any stress out of that section of exhaust.
Ian
Ian
Trending Topics
#8
I replace mine(my01) with catless from another subi.
Perfect fit no leaks cracks etc & costs next to nothing.
Do a search because so far no 1 has been able to record any power gains between catless OEM Vs aftermarket uppipe!!!!
Perfect fit no leaks cracks etc & costs next to nothing.
Do a search because so far no 1 has been able to record any power gains between catless OEM Vs aftermarket uppipe!!!!
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM