ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Drivetrain (https://www.scoobynet.com/drivetrain-11/)
-   -   Best/cheapest uppipe (MY02) (https://www.scoobynet.com/drivetrain-11/336773-best-cheapest-uppipe-my02.html)

Daz WRX 17 June 2004 07:32 AM

Best/cheapest uppipe (MY02) +?
 
As title, not a lot in it but Magnex looks ok at £100, any other out there that I should consider or if anyone has one....

Daz.

I know the standard is referred to as a precat pipe but is there actually anything in it that restricts flow?

Daz WRX 18 June 2004 10:07 AM

ttt

DaveR 18 June 2004 02:51 PM

...can't really compare 'em because I've only tried one.

But I was VERY impressed with quicker spool up time after fitting the scoobysport uppipe to my MY02 . (There may be some still knocking about second hand now scoobysport has closed)

cheers
Dave

ScoobySport (SdB) 18 June 2004 03:31 PM

Daz / Dave

Thank you for the recommendation :)

For your information, the scoobysport exhaust system is still available following the relaunch of ScoobySport under new management.

Please see www.scoobysport.com for more information.

All the best

Simon

Steve vRS 18 June 2004 10:21 PM

I had the Scoobysport Janspeed up-pipe. It was expensive but a perfect fit and you don't want to have to go back to it!

Buy new gaskets with it too.

Steve

WRX_Rich 18 June 2004 11:17 PM

when I was in this position I went for a something different to the norm - after my remap I did get around 25 lbs torque extra with equal length manifold - this comes with the up pipe

www.powerstation.org.uk
quote
In an effort to bring Impreza owners the very best in performance for your vehicle whilst keeping the costs down POWERSTATION are please to offer a fully polished stainless steel equal length header! Designed to fit ALL Impreza turbos (WRX/STi) these headers will give around 25lbs/ft of torque across the entire rev range. In 'driving' terms this offers a crisp throttle response, faster pickup, increased smoothness and overall driveability.

scoobyexhausts 19 June 2004 07:31 AM

We still make the orginal up pipe but with double slip joint in the middle , that allows it to move slighty with the heat expansion and takes any stress out of that section of exhaust.

Ian

97 rExy 20 June 2004 01:50 PM

I replace mine(my01) with catless from another subi.
Perfect fit no leaks cracks etc & costs next to nothing.
Do a search because so far no 1 has been able to record any power gains between catless OEM Vs aftermarket uppipe!!!!

Daz WRX 21 June 2004 07:33 AM

Thanks guys, now which one to choose????


All times are GMT +1. The time now is 07:35 PM.


© 2024 MH Sub I, LLC dba Internet Brands